Power Supply - Craftex CX Series Manual

Specifications, while deemed accurate, are not guaranteed.

POWER SUPPLY

AVAILABILITY OF POWER
Before Installation of this machine you will
need to consider the proximity of your
power supply circuit. If available circuits do
not meet the requirements for this machine
you will have to get a new circuit installed
Identification
A. Outfeed table
B. Fence
C. Cutterhead Guard
D. Fence Lock
E. Fence Adjustment Knob
F. Fence Tilt Handle
G. Switch
H. Infeed Table
I. Infeed Table Lever
J.Depth Scale
K. Dust Port
L. Outfeed Table Handwheel
by a licensed electrician. Use of a licensed
electrician will minimize the risks of fire,
electrocution, damage to equipment, and
will insure
accordance to the applicable codes and
standards.
5
everything is wired in