Table of Contents
Advertisement
GENERAL SAFETY INSTRUCTIONS FOR MACHINES
Extreme caution should be used when operating all power tools. Know your power
tool, be familiar with its operation, read through the user manual, and practice safe
usage procedures at all times.
Read and become familiar with this
entire instruction manual. Learn the tools
applications, limitations, and possible
hazards.
CONNECT your machine ONLY to the
matched and specific power source.
ALWAYS
wear
respirators,
hearing
safety shoes, when operating your
machine.
DO NOT wear loose clothing or jewelry
when operating your machine. Wear
protective hair covering.
ALWAYS keep your work area clean,
uncluttered and well lit. DO NOT work on
floor surfaces that are slippery with
sawdust or wax
BE ALERT! DO NOT use prescription
or other drugs that may affect your ability
or judgment to safely use your machine.
DISCONNECT the power source when
changing drill bits, hollow chisels, router
bits, shaper heads, blades, knives or
making other adjustments or repairs.
safety
glasses
protection
and
NEVER leave a tool unattended while it is
in operation.
NEVER allow unsupervised or untrained
person to operate the machine.
NEVER reach over the table when the tool
is in operation.
ALWAYS keep blades, knives and bits
sharpened and properly aligned.
ALWAYS keep the guards in place when
operating your drill press.
ALWAYS use push sticks and feather
boards to safely feed your work through
the machine.
ALWAYS make sure that any tools used
for adjustments are removed before
operating the machine.
ALWAYS keep bystanders safely away
while the machine is in operation.
NEVER attempt to remove jammed cutoff
pieces until the blade has come to a full
stop.
4
Advertisement
Table of Contents
