1. Manuals
  2. Brands
  3. Craftex Manuals
  4. Dust Collector
  5. CX424
  6. Quick start manual

Craftex CX424 Quick Start Manual

1.5 hp dust collector
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MODEL CX424
1.5 HP DUST COLLECTOR
Version 1.0
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CX424 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Craftex CX424

Summary of Contents for Craftex CX424

  • Page 1 MODEL CX424 1.5 HP DUST COLLECTOR Version 1.0...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS General Safety Instructions ..............3 CX424 Specific Safety Instructions ............4 Features ....................5 Physical Features ................... 6 Unpacking ....................7 Setup ...................... 7 Proper Grounding ................... 8 Assembly ....................9 Test Run ....................11 Operation ....................12 Maintenance ...................

  • Page 5: Features

    FEATURES MODEL CX424 – 1.5 HP DUST COLLECTOR As part of the growing line of Craftex woodworking equipment, we are proud to offer the CX424 a 1.5-HP Dust Collector. By following the instructions and procedures laid out in this owner’s manual, you will receive years of excellent service and satisfaction.

  • Page 6: Unpacking

    The CX424 features four casters installed to its base unit for easy mobility. If you want to use the CX424 as a stationary tool, do not install the casters and find an ideal spot where your dust collector will most likely be positioned.

  • Page 7: Proper Grounding

    Improper connection of the equipment- grounding conductor can result in a risk CX424 is for use on a normal 120 volt of electric shock. Check with a qualified circuit. Make sure that the machine is electrician if you are in doubt as to connected to an outlet having the same whether the outlet is properly grounded.

  • Page 8: Assembly

    Place the gasket on the motor / impeller ASSEMBLY opening as shown in figure-5. Follow the instructions below to assemble your CX424. Place the base unit upside down and install the swivel casters to the base unit using screws, nuts and washers provided. See figure-3.
  • Page 9 Figure-7 Installing the collector ring support Attach the collector ring to the collector ring supports and the upper bag support to the collector ring as shown in figure-8. Make sure that the hose opening of the collector ring is facing the motor / impeller. Figure-9 Connecting the hose from the Secure the collector ring from both sides outlet connector to the collector ring...

  • Page 10: Test Run

    Install the collection bag to the bottom of the collector ring and secure it by tightening TEST RUN the collection bag clamp around it as shown in Figure-11. Once you have assembled your dust collector, it is then time for a test run to make sure that the machine works properly and is ready to use.

  • Page 11: Operation

    The tiny dust particles in the air can be assembled and worked during the test run. inhaled easily and can be hazardoos Move the CX424 close to the machine and injurious to your health. use a proper sized hose connecting the...

  • Page 15: Warranty

    This warranty shall not apply to consumable products such as blades, bits, belts, cutters, chisels, punches etceteras. Craftex shall in no event be liable for injuries, accidental or otherwise, death to persons or damage to property or for incidental contingent, special or consequential damages arising from the use of our products.

This manual is also suitable for:

Cx series

Table of Contents