General Safety Instructions - Craftex CX series User Manual

GENERAL SAFETY INSTRUCTIONS

Extreme caution should be used when operating all power tools. Know your power tool, be familiar
with its operation, read through the owner's manual and practice safe usage procedures at all times
ALWAYS read and understand the user man-
ual before operating the machine.
CONNECT your machine ONLY to the matched
and specific power source.
ALWAYS w e ar saf ety glas ses r es pirators,
hearing protection and safety shoes, when op-
erating your machine.
DO NOT w ear loos e c lothing or
jewelry when operating your machine.
A SAFE ENVIRONMENT is important. Keep the
area free of dust, dirt and other debris in the
immediate vicinity of your machine.
BE ALERT! DO NOT use prescription or other
drugs that may affect your ability or judgment
to safely use your machine.
DISCONNECT the power source when chang-
ing drill bits, hollow chisels router bits, shaper
heads, blades, knives or making other adjust-
ments or repairs.
The safety instructions given above can not be complete because the environment in
every shop is different. Always consider safety first as it applies to your individual
working conditions.
NEVER leave a tool unattended while it is in
operation.
NEVER reach over the table when the tool is
in operation.
ALWAYS keep blades, kni ves a n d b i t s
sharpened and properly align ed .
ALL OPERATIONS MUST BE p e r f o r m e d
wit h gaurds i n pl ace t o ensure s a f e t y.
ALWAYS
boards t o sa fel y f eed your work t h r o u g h
t he machine.
ALWAYS make sure that any tools used for adjust-
ments or installation are removed before operating
the machine.
ALWAYS keep bystanders safely away while
the machine is in operation.
WARNING!
use push st icks and f e a t h e r
3