File Menu - Sony HDCU5000 Operating Instructions Manual

MAINTENANCE
Page name Item
Page No.
<OPTION> READ KEY FROM
USB
M09
INSTALLED
OPTIONS
HARDWARE
OPTIONS
<MISC> OPTICAL SIGNAL
BACKUP
M10

FILE Menu

FILE
Page name Item
Page No.
<CCU FILE> FILE INDEX
F01
RECALL
STORE
EXPORT TO USB
IMPORT FROM USB
FILE NAME1 to 5
CLEAR ALL
<LOG> LOG
F02
EXPORT TO USB
CLEAR
Set value
Execute using ENTER.
ENABLE, DISABLE
Set value
1 to 5, 1
NO_FILE
ENABLE, DISABLE
74
Description
Reads the installation key from the USB flash drive.
Lists the installed option software (Display only).
Lists the installed hardware options (Display only).
Sets whether to save the state of the OPTICAL
SIGNAL setting on the <CAMERA I/F> page of the
SYSTEM CONFIG menu for the next startup.
Description
Selects the file number of the target for operation.
All menu settings of the unit can be saved to a CCU
file. Use RECALL to load and apply the saved
settings to simplify the setup operation.
Note
The IP address, subnet mask, and default gateway
settings of the LAN COM connector are not loaded
using RECALL.
Saves a CCU file to the internal memory.
Up to five CCU files can be saved in the unit. Select
the file number on the STORE screen.
Exports a CCU file to the USB flash drive. Exporting
is also supported using the web menu.
The path for the USB flash drive is "/MSSONY/PRO/
CAMERA/HDCU5000"
Imports a CCU file from the USB flash drive.
Importing is also supported using the web menu.
The path for the USB flash drive is "/MSSONY/PRO/
CAMERA/HDCU5000"
Sets the CCU file name.
ASCII code, 1 to 32 characters
Deletes all CCU files.
Enables or disables saving of log files.
Saves logs to the USB flash drive (Execute using
EXEC).
The path of the USB flash drive is "/MSSONY/PRO/
CAMERA/HDCU5000"
Deletes logs stored internally on the unit (Execute
using EXEC).
Note
Logs for up to 30 days are stored. Logs are deleted
when the 30-day maximum is reached, starting with
the oldest.