Sony HDCU5000 Operating Instructions Manual page 80

NETWORK
Page name Item
Page No.
<MULTICAST ADDRESS MULTICAST
5> ADDRESS
N12
META OUT LAN1-1
Displayed only when
HKCU-SFP50 is installed.
META OUT LAN1-2
META OUT LAN1-3
META OUT LAN2-1
META OUT LAN2-2
META OUT LAN2-3
<EMBER+> EMBER+
N13
PORT
PORT NUMBER
CONNECTION
STATUS
<TSL UMD> TSL UMD
N14
PORT
PORT NUMBER
PACKET STATUS
Set value
AUTO, MANUAL
IP ADDRESS 224.0.0.1 to 239.255.255.255
PORT 100 to 65535
DISABLE, ENABLE
LAN-COM
9000
DISCONNECTED, CONNECTING,
CONNECTED
DISABLE, ENABLE
LAN-COM
8900
NOT RECEIVED, RECEIVED
Description
Displays the MULTICAST ADDRESS setting of the
<MULTICAST SETTING> page.
Displays the transmit destination IP address.
Displays the transmit destination port number.
Same setting items and values as META OUT
LAN1-1.
Same setting items and values as META OUT
LAN1-1.
Same setting items and values as META OUT
LAN1-1.
Same setting items and values as META OUT
LAN1-1.
Same setting items and values as META OUT
LAN1-1.
Enables/disables configuration using Ember+.
Note
Can be enabled by installing HZCU-CNFG50 Config
Control Software (option).
Displays the connection port name.
Displays the TCP port number for the Ember+
connection.
Displays the connection status of Ember+
communication.
DISCONNECTED: Disconnected.
CONNECTING: Establishing communication.
CONNECTED: Communication established.
Enables/disables IP Tally using TSL UMD V5.0.
Displays the connection port name.
Displays the UDP port number of the TSL UMD
connection.
Displays the TSL UMD packet reception status.
When received, it also displays IDs and the on/off status
of the red, green, and yellow tallies.
Up to five IDs can be displayed. "AND MORE" is
displayed if there are more.
80