Installing The Menu Panel; Installation Of Options - Sony CCP-9000-C Installation Manual

1-5. Installing the Menu Panel

1-6. Installation of Options

1-5. Installing the Menu Panel
Tools required
. Screws (B4 x 6) :
4 pcs
. Screws (B3 x 5) : 4 pcs
. EL table assemblies : 2 pcs (Sony Part No. : X-3167-779-1)
1. Open the screw holes (M4) as shown in the illustration
into the positions to which the menu panel is going to
be installed.
2. Install the EL table assemblies to the screw holes that
are opened in step 1 using the four screws.
EL table assemblies
B4 x 6
378 mm
3. Install the menu panel using the four screws (B3 x 5).
EL table assemblies
Menu panel
1-8
B4 x 6
68.5 mm
B3 x 5
B3 x 5
1-6. Installation of Options
The CCP-9000-C system is comprised of the following
models according to the system to be used, and shipped
from the factory.
Model name
MKS-9011 1-M/E CONTROL PANEL
MKS-9012 2-M/E CONTROL PANEL
MKS-8011 MENU PANEL
MKS-8031TB TRACKBALL MODULE
MKS-8032 DSK FADER MODULE
MKS-8033 UTILITY/SHOTBOX MODULE
MKS-8035 KEY CONTROL MODULE
MKS-8041 BLANK PANEL (1/2)
MKS-8075 EXTENSION ADAPTOR
SWC-5002 PANEL CABLE (2 m)
SWC-5005 PANEL CABLE (5 m)
SWC-5010 PANEL CABLE (10 m)
CCP-9000