Sony HDCU5000 Operating Instructions Manual page 45

SYSTEM CONFIG
Page name Item
Page No.
<OUTPUT FORMAT IP> IP-OUT3
S11
Displayed only when
HKCU-SFP50 is installed.
IP-OUT4
Set value
MONITOR C, M
FORMAT FIBER TRANSMIT RATE is HIGH
and SYSTEM is 1.001(525): see
page 54
FIBER TRANSMIT RATE is HIGH
and SYSTEM is 1.000(625): see
page 56
FIBER TRANSMIT RATE is ULTRA
and SYSTEM is 1.001(525): see
page 58
FIBER TRANSMIT RATE is ULTRA
and SYSTEM is 1.000(625): see
page 62
OETF SDR
COLOR BT709
SOURCE CAMERA, HD TRUNK
MONITOR C
FORMAT FIBER TRANSMIT RATE is HIGH
and SYSTEM is 1.001(525): see
page 54
FIBER TRANSMIT RATE is HIGH
and SYSTEM is 1.000(625): see
page 56
FIBER TRANSMIT RATE is ULTRA
and SYSTEM is 1.001(525): see
page 58
FIBER TRANSMIT RATE is ULTRA
and SYSTEM is 1.000(625): see
page 62
OETF SDR, HDR OETF
COLOR BT709, BT2020
SOURCE CAMERA
Description
Sets the output for the LAN 1 and LAN 2 connectors.
Sets whether to add characters to the output signal.
C: Characters are not added.
M: Characters are added.
Notes
• Fixed to M when SOURCE is set to CAMERA.
• Fixed to C when SOURCE is set to HD TRUNK.
Sets the output signal format of the LAN 1 and LAN 2
connectors.
Sets the gamma curve of the video output.
Selects the color space of IP-OUT3 video output.
BT709: Sets the color output format to BT709.
Selects the signal source to output.
Sets the output for the LAN 1 and LAN 2 connectors.
Notes
• IP-OUT4 is a setting for dedicated 4K output.
• Output is supported on the HDCU3500 when the
HZCU-UHD35 option is enabled.
Sets whether to add characters to the output signal.
C: Characters are not added.
Note
This is fixed to C.
Sets the output signal format of the LAN 1 and LAN 2
connectors.
Sets the gamma curve of the video output.
Selects the color space of IP-OUT4 video output.
Selects the signal source to output.
45