Sony HDCU5000 Operating Instructions Manual page 44

SYSTEM CONFIG
Page name Item
Page No.
<OUTPUT FORMAT IP> IP-OUT1
S11
Displayed only when
HKCU-SFP50 is installed.
IP-OUT2
Set value
MONITOR C
FORMAT FIBER TRANSMIT RATE is HIGH
and SYSTEM is 1.001(525): see
page 54
FIBER TRANSMIT RATE is HIGH
and SYSTEM is 1.000(625): see
page 56
FIBER TRANSMIT RATE is ULTRA
and SYSTEM is 1.001(525): see
page 58
FIBER TRANSMIT RATE is ULTRA
and SYSTEM is 1.000(625): see
page 62
OETF SDR, HDR OETF
COLOR BT709, BT2020
SOURCE CAMERA
MONITOR C, M
FORMAT FIBER TRANSMIT RATE is HIGH
and SYSTEM is 1.001(525): see
page 54
FIBER TRANSMIT RATE is HIGH
and SYSTEM is 1.000(625): see
page 56
FIBER TRANSMIT RATE is ULTRA
and SYSTEM is 1.001(525): see
page 58
FIBER TRANSMIT RATE is ULTRA
and SYSTEM is 1.000(625): see
page 62
OETF SDR, HDR OETF
COLOR BT709, BT2020
SOURCE CAMERA
Description
Sets the output for the LAN 1 and LAN 2 connectors.
Sets whether to add characters to the output signal.
C: Characters are not added.
Note
This is fixed to C.
Sets the output signal format of the LAN 1 and LAN 2
connectors.
Sets the gamma curve of the video output.
Selects the color space of IP-OUT1 video output.
BT709: Sets the color output format to BT709.
BT2020: Sets the color output format to BT2020.
Selects the signal source to output.
Sets the output for the LAN 1 and LAN 2 connectors.
Sets whether to add characters to the output signal.
C: Characters are not added.
M: Characters are added.
Sets the output signal format of the LAN 1 and LAN 2
connectors.
Sets the gamma curve of the video output.
Selects the color space of IP-OUT2 video output.
BT709: Sets the color output format to BT709.
BT2020: Sets the color output format to BT2020.
Selects the signal source to output.
44