Download Print this page

Sony HDCU5000 Operating Instructions Manual

Camera control unit
Hide thumbs

Advertisement

5-006-304-13 (1)
Camera Control Unit
Operating Instructions
Before operating the unit, please read this manual thoroughly
and retain it for future reference.
HDCU5000
HDCU5500
HDCU3500
© 2019 Sony Corporation

Advertisement

loading

  Related Manuals for Sony HDCU5000

  Summary of Contents for Sony HDCU5000

  • Page 1 5-006-304-13 (1) Camera Control Unit Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. HDCU5000 HDCU5500 HDCU3500 © 2019 Sony Corporation...
  • Page 2: Table Of Contents

    Table of Contents Overview..............3 System Configuration ............4 Location and Function of Parts....... 9 Front Panel ..............9 HDCU5000 Rear Panel ..........11 HDCU5500/3500 Rear Panel ........13 Option Kits ..............15 Status Display ............16 Displaying the Status Screen ........16 Status Display Screen ...........16 Settings Using the Menu of the Unit .....
  • Page 3: Overview

    4K signals. 1500 Master Setup Unit (optional), you can form a system capable of controlling multiple cameras. * Supported on the HDCU5000/5500 when the HKCU-SM50 is installed. The unit can be mounted in a standard 19-inch EIA rack. The height is 3 units (use the RMM-301 Rack Mount Adaptor (option) for the HDCU5500/3500).
  • Page 4: System Configuration

    • SYSTEM CONFIG t <CAMERA I/F> t FIBER TRANSMIT RATE (page 30) b) Signal transfer up to a maximum of 4 km is possible when using the HDCU5000, Microphone or 2 km when using the HDCU5500. However, the actual transfer distance and...
  • Page 5 HDCU3500 connection example (optical fiber transmission) HDVF-EL75/L750/L770 Viewfinder HDVF-200 HDVF-EL20 HDVF-EL30 BKW-401 Viewfinder Viewfinder Rotation Bracket Sync signal input Lens HDC3500/3100, (for ENG/EFP) Return video input HDC2000 series Color Camera Intercom microphone input USB flash drive CAC-6 2K video Return Video Selector VCT-14 Tripod monitor Attachment...
  • Page 6 Ember+ software a) Signal transfer up to a maximum of 4 km is possible when using the HDCU5000, or 2 km when using the HDCU5500/3500. However, the actual transfer distance may vary depending on the system configuration of the cameras and the type of optical fiber cables used.
  • Page 7 HDC2000 series: HDC2000/2580/2500/2400/1700 b) Install the HKCU-SM50 Single Mode Fiber Connector Kit. c) Set the transmission type using the following menu item on the HDCU5000/5500/3500. SYSTEM CONFIG t <CAMERA I/F> t CABLE TYPE t SINGLE-MODE FIBER d) Signal transfer up to a maximum of 10 km is possible. However, the actual transfer distance may vary depending on the system configuration of the cameras and the type of single-mode optical fiber cables used.
  • Page 8 Connection example (coax (HDCE) connection) HDCU3500 BNC cables (2) HDC2500/2400 HDCE-200 HD Color Camera Camera Extension + Large Lens Adaptor LAN cable Adaptor Switching hub HDC3500 Color Camera Optical fiber cable RCP-3000/1000 series Remote Control Panel HDC2500/2400 HD Color Camera MSU-1000/1500 Master Setup Unit a) Configure the following menu settings.
  • Page 9: Location And Function Of Parts

    Location and Function of Parts Front Panel HDCU5000 HDCU5500/3500 * The sizes of the HDCU5000 and HDCU5500/3500 are shown at different scales. a Red tally indicator b Yellow tally indicator Lights in red when this unit receives a red tally signal. You can Lights in yellow when this unit receives a yellow tally signal.
  • Page 10 When the camera number is not 0, the IP address and subnet Be sure to dry the filter thoroughly before replacing it on the mask of the LAN COM connector are displayed scrolling for a unit. fixed time only when the DISP/MENU lever is held up in the DISP position for 3 seconds.
  • Page 11: Hdcu5000 Rear Panel

    INTERCOM connector on the front panel. You can set a function for this button via the CCU menu. PROD: Connects the producer line. HDCU5000 Rear Panel a Option kit mounting port c Option kit mounting port The HKCU-SFP50 ST 2110 Interface Kit (option) can be Used to install HKCU-SDI50 12G-SDI Extension Kit.
  • Page 12 PROMPTER> page of the MAINTENANCE menu according to Refer also to the Master Setup Unit manual. the application. For details on how to select the signal, contact a Sony service i SDI RET (3G/HD/SD SDI return video input) 1/2/3/4 or sales representative.
  • Page 13: Hdcu5500/3500 Rear Panel

    (optional). or HD tri-level sync signal from the internal sync signal generator (default: SD composite sync signal). For details on how to select the signal, contact a Sony service or sales representative. HDCU5500/3500 Rear Panel * The UHB seal shown on the left of the CAMERA FIBER connector is not present on the HDCU3500.
  • Page 14 Refer also to the Master Setup Unit manual. inputs, camera video signal outputs, and HD-TRUNK outputs. Set them in NETWORK TRUNK on the <TRUNK/ For details on how to select the signal, contact a Sony service PROMPTER> page of the MAINTENANCE menu according to or sales representative.
  • Page 15: Option Kits

    This unit is an option kit that can be installed in the option kit required to use IP output. mounting port 3 on the rear of the HDCU5000 Camera Control Unit and enables support for 1-system quad 12G-SDI HKCU-SM50 Single Mode Fiber Connector Kit output at 4K.
  • Page 16: Status Display

    For HDCU5500/3500 Status Display The CCU system status can be monitored using a video monitor connected to the CHARACTER, SDI OUT 3, or SDI OUT 4 connector. Note To use the SDI OUT 3 or SDI OUT 4 connector, set SYSTEM CONFIG t <OUTPUT FORMAT1>...
  • Page 17 Camera settings System status *Sy stem Sta tus* 01 /11 Ca mera For mat : 1080 /59. 94P H D C 55 0 0 H J2 2eX 7 . 6 B * E X F : 4 . 7 Ca mera Cab le : Conn ecte d C able Typ e : Fibe r Ca mera Cabl e...
  • Page 18 UHD-SDI connectors CCU Analog Out: Output format of the analog output connector * Mu l t i F o r m a t 3 * 0 4 / 1 1 Camera and unit intercom status UH D - S D I A 3 8 4 0 x 2 1 6 0 / 5 9 .
  • Page 19: Settings Using The Menu Of The Unit

    IP stream status Settings Using the Menu Displayed only when HKCU-SFP50 is installed. of the Unit * IP S t r e a m * 1 0 / 1 1 OU T V I D E O 1 I N R E T U R N 1 V I D E O 2 R E T U R N 2 V I D E O 3...
  • Page 20 To suspend menu changes Menu name Description Set the DISP/MENU lever to the MENU position to exit the SYSTEM CONFIG Input/output signal format and menu screen. system-related settings The DISP/MENU lever can be set to the MENU position VIDEO/MONITOR Video-related settings again to restart the operation.
  • Page 21: Settings Using The Web Menu

    When <WEB MENU> t SERVICE DISCOVERY is set to OFF in the NETWORK menu, the multicast protocol is not used and only the information for the local unit is acquired and displayed. HDCU5000 Router (DHCP server) HDCU5500/3500 Check that the devices are turned on.
  • Page 22: Structure Of The Web Menu

    Structure of the Web Menu The web menu is comprised by an area showing the settings and information of the unit and an area showing a list view of the information for other CCU units on the same subnet. a Unit settings/information display area •...
  • Page 23: Name And Function Of Settings/Information Display Area

    Name and Function of Settings/Information Display Area Note When a setting of the unit is changed using the setup menu, the display in the web menu is also updated. a Favicon / CCU number display Displays the favicon and CCU number in a tab. b Error message display Displays the number of current errors at the top right of the icon.
  • Page 24: Ccu Information List Screen

    • Models supported by the CCU information list display are HDCU3100 V2.2 and later, HDCU3170 V2.2 and later, and HDCU5000/5500/3500 V1.0 and later. The front panel information of each CCU is displayed on each row. You can switch to the web menu of a CCU by clicking the...
  • Page 25: Menu Tree

    Menu Tree SYSTEM CONFIG Menu OUTPUT FORMAT1 SDI-OUT1 (S07) MONITOR FORMAT Menu items marked “1)” are displayed only for HDCU5000/ OETF 5500 or HDCU3500 (with HZCU-UHD35 installed). COLOR Menu items marked “2)” are displayed only when SDI-OUT2 HKCU-SFP50 is installed.
  • Page 26: Video/Monitor Menu

    VIDEO/MONITOR Menu OUTPUT FORMAT4 UHD-SDI E (S10) MONITOR FORMAT OETF COLOR BAR 4K/HD-BAR SELECT COLOR (V01) MF-CB UHD-SDI F SLOPE MONITOR FORMAT SOURCE OETF SELECT COLOR BAR-CHARACTER UHD-SDI G MOVING SYMBOL MONITOR TYPE FORMAT SIZE OETF 2SI DIAMOND MARK COLOR HFR CHANNEL MARK UHD-SDI H BAR CHARACTER...
  • Page 27: Audio/Intercom Menu

    AUDIO/INTERCOM Menu MAINTENANCE Menu Menu items marked “1)” are displayed only when HKCU-SFP50 is installed. TRUNK/PROMPTER TRUNK LINE (M01) CHANNEL MODE INTERFACE MIC GAIN CAM MIC GAIN PROMPTER CH (A01) TRUNK/PROMPTER2 NETWORK TRUNK (M02) DATA RATE AUDIO OUT DELAY CAMERA (A02) AES/EBU OUT HD/UHD TRUNK...
  • Page 28: Network Menu

    NETWORK Menu MULTICAST MULTICAST ADDRESS ADDRESS 1 VIDEO OUT LAN1-1 (N08) IP ADDRESS Menu items marked “1)” are displayed only when PORT HKCU-SFP50 is installed. VIDEO OUT LAN1-2 IP ADDRESS PORT IP ADDRESS PORT VIDEO OUT LAN1-3 (N01) DHCP IP ADDRESS IP ADDRESS PORT SUBNET MASK...
  • Page 29: Diagnosis Menu

    IP ADDRESS PORT Menu items marked “1)” are displayed only on the HDCU5500/ INTERCOM IN LAN1 3500. IP ADDRESS Menu items marked “2)” are displayed only on the HDCU5000. PORT SRC IP INTERCOM IN LAN2 BOARD STATUS IP ADDRESS (D01)
  • Page 30: Menu List

    Menu List Legend The following conventions are used in the menu list table. Settings column values (e.g. ON, OFF, 0): Default settings are underlined Execute using ENTER: When using the setup menu directly, press the CONTROL knob or move the CANCEL/ENTER lever to the ENTER position to execute.
  • Page 31 UHD-SDI B Sets UHD-SDI B. Output (fixed) SIGNAL SDI-OUT, UHD TRUNK Sets the signal function. Note UHD TRUNK is available on the HDCU5000/5500 only. UHD-SDI C Sets UHD-SDI C. IN, OUT Selects input or output. SIGNAL When OUT is selected in I/O: Sets the signal function.
  • Page 32 SYSTEM CONFIG Page name Item Set value Description Page No. <REAR I/F> CHARACTER CHARACTER, AES/EBU, SYNC Sets the function to assign to the CHARACTER, AES/EBU, SYNC connector. CHARACTER: Set to VBS output on which character superposition is performed. AES/EBU: Set to AES/EBU output. Note AES/EBU is available on the HDCU5500/3500 only.
  • Page 33 SYSTEM CONFIG Page name Item Set value Description Page No. <MULTI FORMAT> SYSTEM 1.001(525), 1.000(625) Selects the operating frequency of the system. CAMERA FORMAT When FIBER TRANSMIT RATE is Selects the system format. set to ULTRA and 1.001(525) is selected in SYSTEM: Note 3840×2160/59.94P(2×), 3840×2160/59.94P,...
  • Page 34 SYSTEM CONFIG Page name Item Set value Description Page No. <MULTI FORMAT> CCU VIDEO DISABLE, ENABLE Sets the video converter function. CONVERT Set to ENABLE when CAMERA FORMAT is set to the following. CAMERA FORMAT Conversion output 3840×2160/59.94P(2×) 720/59.94P 3840×2160/59.94P UHD/59.94P(4K/HDR) 1080/59.94P(4K/HDR) 1080/59.94P...
  • Page 35 SYSTEM CONFIG Page name Item Set value Description Page No. <HDR> HDR MODE OFF, LIVE HDR OFF: Normal shooting operation. LIVE HDR: Used for LIVE HDR shooting. Note When LIVE HDR is selected, camera paint functions can be used for both HDR output and SDR output. However, some paint functions are not supported for HDR output.
  • Page 36 SYSTEM CONFIG Page name Item Set value Description Page No. <OUTPUT FORMAT1> SDI-OUT1 Sets the output for the SDI OUT 1 connector. MONITOR Sets whether to add characters to the output signal. C: Characters are not added. Note This is fixed to C. FORMAT FIBER TRANSMIT RATE is HIGH Sets the output signal format of the SDI OUT 1...
  • Page 37 SYSTEM CONFIG Page name Item Set value Description Page No. <OUTPUT FORMAT1> SDI-OUT3 Sets the output for the SDI OUT 3 connector. MONITOR C, M Sets whether to add characters to the output signal. C: Characters are not added. M: Characters are added. FORMAT FIBER TRANSMIT RATE is HIGH Sets the output signal format of the SDI OUT 3...
  • Page 38 SYSTEM CONFIG Page name Item Set value Description Page No. <OUTPUT FORMAT2> SDI-I/O1 Sets the output for the SDI I/O 1 connector. MONITOR Sets whether to add characters to the output signal. C: Characters are not added. Note This is fixed to C. FORMAT FIBER TRANSMIT RATE is HIGH Sets the output signal format of the SDI I/O 1...
  • Page 39 SYSTEM CONFIG Page name Item Set value Description Page No. <OUTPUT FORMAT2> SDI-I/O3 Sets the output for the SDI I/O 3 connector. MONITOR Sets whether to add characters to the output signal. C: Characters are not added. Note This is fixed to C. FORMAT FIBER TRANSMIT RATE is HIGH Sets the output signal format of the SDI I/O 3...
  • Page 40 SYSTEM CONFIG Page name Item Set value Description Page No. <OUTPUT FORMAT3> UHD-SDI A Sets the output of the UHD SDI A connector. MONITOR Sets whether to add characters to the output signal. C: Characters are not added. Note This is fixed to C. FORMAT FIBER TRANSMIT RATE is HIGH Sets the output signal format of the UHD SDI A...
  • Page 41 SYSTEM CONFIG Page name Item Set value Description Page No. <OUTPUT FORMAT3> UHD-SDI C Sets the output of the UHD SDI C connector. MONITOR Sets whether to add characters to the output signal. C: Characters are not added. Note This is fixed to C. FORMAT FIBER TRANSMIT RATE is HIGH Sets the output signal format of the UHD SDI C...
  • Page 42 SYSTEM CONFIG Page name Item Set value Description Page No. <OUTPUT FORMAT4> UHD-SDI E Sets the output of the UHD SDI E connector. MONITOR Sets whether to add characters to the output signal. Displayed only when C: Characters are not added. HKCU-SDI50 is installed.
  • Page 43 SYSTEM CONFIG Page name Item Set value Description Page No. <OUTPUT FORMAT4> UHD-SDI G Sets the output of the UHD SDI G connector. MONITOR Sets whether to add characters to the output signal. Displayed only when C: Characters are not added. HKCU-SDI50 is installed.
  • Page 44 SYSTEM CONFIG Page name Item Set value Description Page No. <OUTPUT FORMAT IP> IP-OUT1 Sets the output for the LAN 1 and LAN 2 connectors. MONITOR Sets whether to add characters to the output signal. Displayed only when C: Characters are not added. HKCU-SFP50 is installed.
  • Page 45 SYSTEM CONFIG Page name Item Set value Description Page No. <OUTPUT FORMAT IP> IP-OUT3 Sets the output for the LAN 1 and LAN 2 connectors. MONITOR C, M Sets whether to add characters to the output signal. Displayed only when C: Characters are not added.
  • Page 46 IP-RET2, IP-RET3, IP-RET4 • UHD-SDI G and UHD-SDI H can be selected on SDI-RET1, SDI-RET2, SDI-RET3, the HDCU5000 when HKCU-SDI50 is installed. SDI-RET4, SDI-I/O1, SDI-I/O2, SDI-I/O3, SDI-I/O4, UHD-SDI C, UHD-SDI D, UHD-SDI G, UHD-SDI H, VBS-RET, IP-RET1,...
  • Page 47 UHD-SDI C, UHD-SDI D is set to SDI-RET. 3840×2160/25P/6G • UHD-SDI G and UHD-SDI H are displayed only 3840×2160/24P/6G when HKCU-SDI50 is installed on the HDCU5000. <RETURN FORMAT IP> IP-RET Sets the format of the return signal to be input on the LAN 1 and LAN 2 connectors.
  • Page 48: Return Formats And Output Formats

    Return Formats and Output Formats This section lists the return formats and output formats for the connector blocks with shading in the following diagram. HDCU5000 HDCU5500/3500...
  • Page 49 Return format (when FIBER TRANSMIT RATE is set to HIGH and SYSTEM is set to 1.001(525)) Note UHD-SDI A and UHD-SDI B are dedicated output connectors, and a return format cannot be configured. CAMERA SYSTEM CONFIG t SYSTEM CONFIG t SYSTEM CONFIG t SYSTEM CONFIG t FORMAT...
  • Page 50 Return format (when FIBER TRANSMIT RATE is set to HIGH and SYSTEM is set to 1.000(625)) Note UHD-SDI A and UHD-SDI B are dedicated output connectors, and a return format cannot be configured. CAMERA SYSTEM CONFIG t SYSTEM CONFIG t SYSTEM CONFIG t SYSTEM CONFIG t FORMAT...
  • Page 51 Return format (when FIBER TRANSMIT RATE is set to ULTRA and SYSTEM is set to 1.001(525)) Note UHD-SDI A and UHD-SDI B are dedicated output connectors, and a return format cannot be configured. CAMERA SYSTEM CONFIG t SYSTEM CONFIG t SYSTEM CONFIG t SYSTEM CONFIG t FORMAT...
  • Page 52 525/59.94I(PsF) 525/59.94I(PsF) *1 Configurable only on HDCU5000 when HKCU-SDI50 is installed. *2 720 input can be selected when CCU VIDEO CONVERT is set to ENABLE. *3 720 input can be selected when both CCU VIDEO CONVERT is set to ENABLE and the HDR mode of the connected camera is set to OFF.
  • Page 53 625/50I(PsF) 625/50I(PsF) *1 Configurable only on HDCU5000 when HKCU-SDI50 is installed. *2 720 input can be selected when CCU VIDEO CONVERT is set to ENABLE. *3 720 input can be selected when both CCU VIDEO CONVERT is set to ENABLE and the HDR mode of the connected camera is set to OFF.
  • Page 54 Formats settable for UHD SDI, SDI OUT, SDI I/O, and IP OUT connectors (when FIBER TRANSMIT RATE is set to HIGH and SYSTEM is set to 1.001(525)) Note For underlined formats, the mode can be switched between HDR and SDR according to the Live HDR mode setting of the connected camera.
  • Page 55 720/59.94P(2×)/Link2 720/59.94P(2×)/3G-B/ 720/59.94P(2×)/3G-B/ Link1&Link2 Link1&Link2 720/59.94P 720/59.94P 525/59.94I 525/59.94I *1 Configurable only on HDCU5000 when HKCU-SDI50 is installed. *2 Configurable only when the HKCU-SFP50 is installed. *3 720 output can be selected when CCU VIDEO CONVERT is set to ENABLE.
  • Page 56 Formats settable for UHD SDI, SDI OUT, SDI I/O, and IP OUT connectors (when FIBER TRANSMIT RATE is set to HIGH and SYSTEM is set to 1.000(625)) Note For underlined formats, the mode can be switched between HDR and SDR according to the Live HDR mode setting of the connected camera.
  • Page 57 720/50P(2×)/Link2 720/50P(2×)/3G-B/ 720/50P(2×)/3G-B/ Link1&Link2 Link1&Link2 720/50P 720/50P 625/50I 625/50I *1 Configurable only on HDCU5000 when HKCU-SDI50 is installed. *2 Configurable only when the HKCU-SFP50 is installed. *3 720 output can be selected when CCU VIDEO CONVERT is set to ENABLE.
  • Page 58 Formats settable for UHD SDI, SDI OUT, SDI I/O, and IP OUT connectors (when FIBER TRANSMIT RATE is set to ULTRA and SYSTEM is set to 1.001(525)) Note For underlined formats, the mode can be switched between HDR and SDR according to the Live HDR mode setting of the connected camera.
  • Page 59 CAMERA SYSTEM CONFIG t SYSTEM CONFIG t SYSTEM CONFIG t SYSTEM CONFIG t FORMAT <OUTPUT FORMAT3> <OUTPUT FORMAT1> <OUTPUT FORMAT2> <OUTPUT FORMAT IP> SYSTEM CONFIG t <OUTPUT FORMAT4> <OUTPUT FORMAT3>: SDI-OUT1, SDI-OUT2, SDI-I/O1, SDI-I/O2, IP-OUT1 , IP-OUT2 UHD-SDI A, UHD-SDI B, SDI-OUT3, SDI-OUT4 SDI-I/O3, SDI-I/O4 IP-OUT3...
  • Page 60 CAMERA SYSTEM CONFIG t SYSTEM CONFIG t SYSTEM CONFIG t SYSTEM CONFIG t FORMAT <OUTPUT FORMAT3> <OUTPUT FORMAT1> <OUTPUT FORMAT2> <OUTPUT FORMAT IP> SYSTEM CONFIG t <OUTPUT FORMAT4> <OUTPUT FORMAT3>: SDI-OUT1, SDI-OUT2, SDI-I/O1, SDI-I/O2, IP-OUT1 , IP-OUT2 UHD-SDI A, UHD-SDI B, SDI-OUT3, SDI-OUT4 SDI-I/O3, SDI-I/O4 IP-OUT3...
  • Page 61 SDI-OUT2, SDI-I/O1, and SDI-I/O2. SDI-I/O2. *1 Configurable only on HDCU5000 when HKCU-SDI50 is installed. *2 Configurable only when the HKCU-SFP50 is installed. *3 720 output can be selected when CCU VIDEO CONVERT is set to ENABLE. *4 720 output can be selected when both CCU VIDEO CONVERT is set to ENABLE and the HDR mode of the connected camera is set to OFF.
  • Page 62 Formats settable for UHD SDI, SDI OUT, SDI I/O, and IP OUT connectors (when FIBER TRANSMIT RATE is set to ULTRA and SYSTEM is set to 1.000(625)) Note For underlined formats, the mode can be switched between HDR and SDR according to the Live HDR mode setting of the connected camera.
  • Page 63 CAMERA SYSTEM CONFIG t SYSTEM CONFIG t SYSTEM CONFIG t SYSTEM CONFIG t FORMAT <OUTPUT FORMAT3> <OUTPUT FORMAT1> <OUTPUT FORMAT2> <OUTPUT FORMAT IP> SYSTEM CONFIG t <OUTPUT FORMAT4> <OUTPUT FORMAT3>: SDI-OUT1, SDI-OUT2, SDI-I/O1, SDI-I/O2, IP-OUT1 , IP-OUT2 UHD-SDI A, UHD-SDI B, SDI-OUT3, SDI-OUT4 SDI-I/O3, SDI-I/O4 IP-OUT3...
  • Page 64 CAMERA SYSTEM CONFIG t SYSTEM CONFIG t SYSTEM CONFIG t SYSTEM CONFIG t FORMAT <OUTPUT FORMAT3> <OUTPUT FORMAT1> <OUTPUT FORMAT2> <OUTPUT FORMAT IP> SYSTEM CONFIG t <OUTPUT FORMAT4> <OUTPUT FORMAT3>: SDI-OUT1, SDI-OUT2, SDI-I/O1, SDI-I/O2, IP-OUT1 , IP-OUT2 UHD-SDI A, UHD-SDI B, SDI-OUT3, SDI-OUT4 SDI-I/O3, SDI-I/O4 IP-OUT3...
  • Page 65 SDI-OUT2, SDI-I/O1, and SDI-I/O2. SDI-I/O2. *1 Configurable only on HDCU5000 when HKCU-SDI50 is installed. *2 Configurable only when the HKCU-SFP50 is installed. *3 720 output can be selected when CCU VIDEO CONVERT is set to ENABLE. *4 720 output can be selected when both CCU VIDEO CONVERT is set to ENABLE and the HDR mode of the connected camera is set to OFF.
  • Page 66: Video/Monitor Menu

    VIDEO/MONITOR Menu VIDEO/MONITOR Page name Item Set value Description Page No. <COLOR BAR> 4K/HD-BAR SELECT BAR 16:9(100%), BAR 16:9(75%), Selects the color bars for 4K output/HD output. SMPTE 16:9(BLACK), SMPTE 16:9(–I/Q), BAR 4:3(100%), BAR 4:3(75%), SMPTE 4:3(BLACK), SMPTE 4:3(–I/Q), MF-ARIB(75%), MF-ARIB(100%), MF-ARIB(+I), MF-SMPTE(–I,Q), MF-SMPTE(75%,Q),...
  • Page 67 VIDEO/MONITOR Page name Item Set value Description Page No. <COLOR BAR> HFR CHANNEL ON, OFF MARK <BAR CHARACTER> BAR CHARACTER Sets the character string to be displayed on each of lines 1 to 16. ALL CLEAR Clears all the character strings set for BAR CHARACTER.
  • Page 68 VIDEO/MONITOR Page name Item Set value Description Page No. <SPIRIT LEVEL> INDICATOR OFF, ON, --- Sets spirit level display. This can be set when connected with a camera which has a lens that supports serial communication attached. REVERSE OFF, ON Selects the indicator move direction for tilting.
  • Page 69: Audio/Intercom Menu

    AUDIO/INTERCOM Menu AUDIO/INTERCOM Page name Item Set value Description Page No. <MIC GAIN> CAM MIC GAIN Sets the camera microphone gain. (---), 20, 30, 40, 50, 60 dB Set according to the microphone used. (---): Displayed when a camera is not connected (---), 20, 30, 40, 50, 60 dB (Display only).
  • Page 70 AUDIO/INTERCOM Page name Item Set value Description Page No. <FRONT INTERCOM> MIC/PGM (PGM ON), (MIC OFF), (MIC ON) Front panel MIC/PGM switch position (Display only) (PROD), (ENG), (PRIVATE) Front panel INTERCOM switch position. (Display only) PRIVATE SW ENABLE, Operation when the INTERCOM switch on the front DISABLE(SET TO ENG), panel is set to the PRIV (private) position.
  • Page 71 AUDIO/INTERCOM Page name Item Set value Description Page No. <IP AUDIO> AUDIO OUT FORMAT L24/48kHz/1ms/2ch, L24/48kHz/ Sets the audio format. 1ms/4ch, L24/48kHz/1ms/8ch, Displayed only when L24/48kHz/0.125ms/2ch, L24/ HKCU-SFP50 is installed. 48kHz/0.125ms/4ch, L24/48kHz/ 0.125ms/8ch, L24/48kHz/ 0.125ms/16ch CH ORDER MIC1, MIC2, AES/EBU1, Displays the channel order.
  • Page 72: Maintenance Menu

    Displays the HD TRUNK data rate. HD PROMPTER ENABLE, DISABLE Displays whether HD PROMPTER is enabled/ disabled (Display only). Fixed to DISABLE when using SDI-RET on HDCU5000/5500. FRAME SYNC OFF, ON, (ON) Turns the frame synchronizer function ON/OFF. SOURCE SDI-I/O4, IP-RET3 Sets the HD prompter signal source.
  • Page 73 MAINTENANCE Page name Item Set value Description Page No. <MENU SETTINGS> PAGE RESUME ON, OFF Turns the menu mode resume page display function ON/OFF. ALARM JUMP ON, OFF Turns the error-related page display function ON/ OFF for when an error occurs while in menu mode. CAMERA MENU OFF, ON Displays the camera menu.
  • Page 74: File Menu

    Exports a CCU file to the USB flash drive. Exporting is also supported using the web menu. The path for the USB flash drive is “/MSSONY/PRO/ CAMERA/HDCU5000” IMPORT FROM USB Imports a CCU file from the USB flash drive. Importing is also supported using the web menu.
  • Page 75: Network Menu

    NETWORK Menu NETWORK Page name Item Set value Description Page No. <IP ADDRESS> PORT LAN-COM, LAN1, LAN2 Selects the port for which to set the IP address. DHCP ON, OFF Enables or disables DHCP. IP ADDRESS 0.0.0.0 to 255.255.255.255 Sets the IP address. Note If there is no DHCP server available on the network when DHCP is set to ON, a unique Link-Local...
  • Page 76 NETWORK Page name Item Set value Description Page No. <WEB MENU> WEB MENU ENABLE, DISABLE Enables/disables the web menu. PORT LAN-COM Selects the connection port. SERVICE ON, OFF Enables/disables the service discovery function. DISCOVERY ON: Display the CCU list in the web menu. OFF: Do not display the CCU list in the web menu.
  • Page 77 NETWORK Page name Item Set value Description Page No. <PTP STATUS> PTP NIC LAN1, LAN2 Displays the port on which PTP is running. STATUS NO MASTER, LOCKED, Displays the PTP status. LOCKING, NOT IN USE NOT IN USE: PTP operation stopped Displayed only when HKCU-SFP50 is installed.
  • Page 78 NETWORK Page name Item Set value Description Page No. <NMOS> PORT DISABLE, LAN-COM Selects the ports on which NMOS is enabled. Can be selected only when <IP LIVE> t IP LIVE SYSTEM MANAGER t PORT is set to DISABLE. Displayed only when HKCU-SFP50 is installed.
  • Page 79 NETWORK Page name Item Set value Description Page No. <MULTICAST ADDRESS MULTICAST AUTO, MANUAL Displays the MULTICAST ADDRESS setting of the 2-1> ADDRESS <MULTICAST SETTING> page. RETURN LAN1-1 Note Displayed only when Displayed on the HDCU3500 only when the HKCU-SFP50 is installed. HZCU-UHD35 option is enabled.
  • Page 80 NETWORK Page name Item Set value Description Page No. <MULTICAST ADDRESS MULTICAST AUTO, MANUAL Displays the MULTICAST ADDRESS setting of the 5> ADDRESS <MULTICAST SETTING> page. META OUT LAN1-1 Displayed only when IP ADDRESS 224.0.0.1 to 239.255.255.255 Displays the transmit destination IP address. HKCU-SFP50 is installed.
  • Page 81 ENABLE, DISABLE Enables/disables SNMP V1. ENABLE ENABLE, DISABLE Enables/disables SNMP V2C. V1/V2C RO COMMUNITY sony Displays the ReadOnly community name (ASCII code, up to 32 characters). ALLOW HOST ANY, SPECIFIC Sets the hosts that can be connected. ANY: Allow access from all IP addresses.
  • Page 82: Diagnosis Menu

    NETWORK Page name Item Set value Description Page No. <PING> PORT LAN-COM, LAN1, LAN2 Selects the PING transmission destination port. Note LAN1 and LAN2 are available only when HKCU-SFP50 is installed. IP ADDRESS 0.0.0.0 to 255.255.255.255 Sets the IP address of the PING transmit destination. PING PING transmission.
  • Page 83 Displays the power supply unit rear fan operation status. FRONT FAN1/2 OK, STOP Displays the operating status of the front panel fans 1 and 2 (HDCU5000 only). FRONT FAN4 OK, STOP Displays the operating status of the front panel fan 4 (HDCU5000 only).
  • Page 84: Appendix

    CCU:OPTICAL CONDITION the life expectancy of these parts is guaranteed. For details on ERROR parts replacement, contact your Sony representative. CCU:PS FAN STOP Power supply block FAN error The life expectancy of the electrolytic capacitor is about...
  • Page 85: Specifications

    100/120/220 to 240 V AC, 50/60 Hz 3G SDI/HD SDI/SD SDI, character signal (For details about switching the voltage, selectable contact a Sony service or sales REFERENCE IN/OUT BNC type (2), loop-through output representative.) HD: SMPTE ST274, tri-level sync signal, Current consumption 7 A (max.)
  • Page 86: Hdcu5500

    UHD SDI C, D, G, H 12G/6G/3G/HD SDI I/O External dimensions (Unit: mm (inches)) BNC type (2) 12G SDI: SMPTE ST2082, 0.8 Vp-p, 75 ohms, 11.88 Gbps/11.868 Gbps 6G SDI: SMPTE ST2081, 0.8 Vp-p, 75 ohms, 5.940 Gbps/5.934 Gbps 3G SDI: SMPTE ST424/425 Level-A/B, 0.8 Vp-p, 75 ohms, 2.970 Gbps/ 2.967 Gbps HD SDI: SMPTE ST292, 0.8 Vp-p,...
  • Page 87: Hdcu3500

    Input connectors United States and Canada: Plug holder B (2-990-242-01) Other areas: Plug holder C (3-613-640-01) AC IN 100 V to 240 V AC (1) CCA-5-3 Connection Cable (3 meters), CCA-5-10 Connection SDI RET 1 to 4 BNC type (4) Cable (10 meters) 3G SDI: SMPTE ST424/425, 2.970 Gbps/ RMM-301 Rack Mount Adaptor...
  • Page 88: Hkcu-Fb50

    TRUNK 12-pin (1) UHD SDI C, D 12G/3G/HD SDI I/O BNC type (2) LAN COM 8-pin (1) 12G SDI: SMPTE ST2082, 0.8 Vp-p, NETWORK TRUNK 8-pin (1) 75 ohms, 11.88 Gbps/11.868 Gbps SDI I/O 1 to 4 3G/HD/SD SDI I/O * 12G SDI can be selected by installing the BNC type (4) HZCU-UHD35.
  • Page 89: Hkcu-Sdi50

    Operating Instructions (1) To meet the requirements of the software copyright holders, Sony is obligated to inform you of the content of these licenses. For the content of these licenses, see the PDF file in the...

This manual is also suitable for:

Hdcu5500Hdcu3500