File Menu - Sony CCU-TX50 Operating Instructions Manual

Menu Operation

FILE Menu

The FILE menu consists of 4 pages. To display the
FILE menu, first display the TOP MENU, turn the
MENU dial to select FILE, then press the MENU dial.
For details on how to display the TOP MENU, see
"Displaying the TOP MENU" on page 55
<SCENE FILE1>
WHITE:OK
PAGE 1/2
1 :
2 :
3 :
4 :
5 :
STANDARD
SCENE WHITE DATA:
Structure and setting values of the FILE menu
Submenu title Page Setting item:
<SCENE FILE1> F1
<SCENE FILE2> F2
70
Chapter 4 Viewfinder Screen Indications and Menus
F1 TOP
STORE
6 :
7 :
8 :
9 :
10:
ON
Selectable Remarks
Initial value values
PAGE 1/2 1/2, 2/2
STORE
PAGE 1/2:1: to 10:
PAGE 2/2:11: to 20:
STANDARD:
SCENE WHITE DATA: ON, OFF
ON
SCENE FILE
READ (MStCAMERA)
WRITE
(CAMERAtMS)
FILE ID:
CAM CODE
DATE 2003/08/01
Using the scene files, data for specific shooting
conditions are stored in memory of this unit, and
stored data can be retrieved.
Up to 20 scene files can be registered, and scene files
can be stored in a Memory Stick. A scene file stored in
a Memory Stick can be copied to other DXC-D50/
D50P/D50WS/D50WSP cameras to easily share the
same setup among several cameras.
For details, see "Storing and Retrieving a Scene File" on
page 72, and "Storing to and Retrieving from a Memory
Stick" on page 73.
To select a scene file. Up to 20 files can be set or
selected. If the 11th file or onward is not set, Page
2/2 will not be displayed.
— To store a scene file
— To retrieve the scene file corresponding to the selected
number
— To select if the standard settings are to be used or not
To select if white balance data are to be included in the
scene files read from memory.
— To write or read a scene file to/from a Memory Stick
— To copy the data in the Memory Stick to the camera
Note
If scene files are stored in the camera, they are
replaced by the data from the Memory Stick.
— To write the data in the camera onto the Memory Stick.
All scene files set in the camera are copied.
Note
If any scene file data are stored in the Memory Stick,
they are replaced by the data from the camera.
— A filename within 8 characters can be set.
— The model name of the camera is automatically
displayed.
— To display the date when a file is created