Setup Menu; Changing Menu Item Settings - Sony HDCU1700 Operation Manual

ROM version information for major
components
* R O M V e r s i o n *
C A M E R A H D C 1 7 0 0
1 . 0 0 1 1 .12 . 2 0
C C U H D C U 1 7 0 0
1 . 0 0 1 1 .12 . 2 0
CAMERA: ROM version of the camera connected to this unit
CCU: ROM version of this unit
1 7 / 1 7

Setup Menu

The CCU system and peripheral settings can be checked and
modified using a picture monitor connected to the PIX output.

Changing Menu Item Settings

The menu screen is controlled using the knob and levers in the
MENU control block on the front panel.
Setting the CANCEL/ENTER lever to the ENTER position and
pressing the CONTROL knob perform the same function.
DISP/MENU lever and indicator
CANCEL/ENTER lever
CONTROL knob
To display a menu page
Set the DISP/MENU lever to the MENU position.
When first powered on, the CCU MENU page is displayed.
To display the CCU MENU page
In menu display mode, turn the CONTROL knob to move the
pointer (,) to TOP in the upper right corner of the menu
page, then press the CONTROL knob. The CCU MENU
showing the menu configuration is displayed.
* * CC U M EN U * *
cS Y ST EM OP ER A TI ON
CC U C ON FI G UR AT I ON
NE TW O RK S E TT IN G S
Menu name
SYSTEM OPERATION
CCU CONFIGURATION
NETWORK SETTINGS
To select an item in the CCU MENU
Turn the CONTROL knob to move the pointer (,) up/down to
the desired menu item, then press the CONTROL knob. The
most recently viewed page in the selected menu is displayed.
To change the displayed page
1
Turn the CONTROL knob to move the pointer (,) to
the page number, then press the CONTROL knob.
21
Description
Input/output signal format and
system-related settings
CCU configuration settings
Network-related settings