Menu Configuration And Basic Menu Operations; Basic Operating Procedure - Sony MSU-900 Operation Manual

Menu Configuration and
Basic Menu Operations
The MSU-900/950 provides menu operations for various
functions such as adjustments of system equipment.

Basic Operating Procedure

MSU-900
MODE
FUNCTION
MULTI
CONFIG
1
MAINTENANCE
SCENE
FILE
PAINT
MSU-950
MODE
Clear
SCENE
FUNCTION
1
MULTI
CONFIG
MAINTENANCE
FILE
PAINT
1
Display a menu.
Press and light one of the MODE buttons.
The menu operation mode is initiated and the menu for
the pressed button appears on the display. For the items
on each menu, see the page shown in parentheses.
FUNCTION: Function menu (page 68)
For display configuration, see page 60.
MULTI: Multi-Control menu (page 61)
CONFIG: Configuration menu (page 62)
MAINTENANCE: Maintenance menu (page 63)
For adjustments, see"Initial Settings" (page 70).
FILE: File control menu (page 64)
58

Menu Configuration and Basic Menu Operations

2
Clear Home
3
2
Home
3
PAINT: Paint menus (page 65)
For display configuration, see page 59.
SCENE: Scene file operation menu (page 69)
For operation, see page 61.
2
Select the item to be adjusted.
Press the button that shows the name of the item on the
menu to obtain the corresponding adjustment display
or operation area.
When the selected menu is composed of multiple
pages
For menus composed of multiple pages, such as the
Paint menu, press v or V to flip the pages.
See "Initial display" on page 59.
When a submenu is shown
Press the desired submenu item to change the display.
See "Submenu" on page 59 .
3
Set or adjust the item (parameters).
• Turn the control knobs (or press the button) to adjust
(or set) the corresponding item (parameters) to the
desired values.
See "Adjustment display" on page 59.
• When a message is displayed, follow the instructions
[OK]
and press .
When the adjustment is finished
• To adjust another item on the same menu, press the name
of that item.
• To adjust items on another menu, press the
corresponding MODE button.
• To release the menu operation mode, press the lit MODE
button.
• You may select the Function menu or Scene file
operation menu without exiting the currently selected
menu. When you exit the Function menu or Scene file
operation menu by either of the following methods, the
previous menu is restored.
- Press the lit FUNCTION or SCENE button so that it
goes dark.
- Press the lit menu select button for the previous menu.