Specifications; Hdcu5000 - Sony HDCU5000 Operating Instructions Manual

Specifications

HDCU5000

General
Power requirements 100/120/220 to 240 V AC, 50/60 Hz
(For details about switching the voltage,
contact a Sony service or sales
representative.)
Current consumption 7 A (max.)
Operating 5 °C to 40 °C (41 °F to 104 °F)
temperature
Storage temperature –20 °C to +60 °C (–4 °F to +140 °F)
Mass Approx. 19.5 kg (43 lb)
External dimensions (Unit: mm (inches))
424 (16
465 (18
480 (19)
Input/output connectors
CAMERA FIBER Optical fiber connector (2)
INTERCOM/TALLY/ D-Sub 50-pin connector (1)
IO PORT
• INTERCOM (PROD/ENG), 4W: 0 dBu,
RTS: 0 dBu, CC: –14 dBu
• PGM, 3 systems, 0 dBu/–20 dBu
• TALLY (R, G, Y)
• FLAG
RCP/CNU 8-pin multi-connector (1)
TRUNK 12-pin (1)
LAN COM 8-pin (1)
NETWORK TRUNK 8-pin (1)
3
/ )
4
3
/ )
8
SDI I/O 1 to 4 3G/HD/SD SDI I/O
BNC type (4)
3G SDI: SMPTE ST424/425 Level-A/B,
0.8 Vp-p, 75 ohms, 2.970 Gbps/
2.967 Gbps
HD SDI: SMPTE ST292, 0.8 Vp-p,
75 ohms, 1.485 Gbps/1.4835 Gbps
SD SDI: SMPTE 259M, 0.8 Vp-p, 75 ohms,
270 Mbps
3G SDI/HD SDI/SD SDI, character signal
selectable
REFERENCE IN/OUT BNC type (2), loop-through output
HD: SMPTE ST274, tri-level sync signal,
0.6 Vp-p, 75 ohms
SD: Black burst (NTSC: 0.286 Vp-p,
75 ohms/PAL: 0.3 Vp-p, 75 ohms) or
NTSC 10F-BB
Input connectors
AC IN 100/120/220 to 240 V (1)
(For details about switching the voltage,
contact a Sony service or sales
representative.)
SDI RET 1 to 4 BNC type (4)
3G SDI: SMPTE ST424/425, 2.970 Gbps/
2.967 Gbps
HD SDI: SMPTE ST292, 1.485 Gbps/
1.4835 Gbps
SD SDI: SMPTE 259M, 270 Mbps
PROMPTER 1 BNC type (2), loop-through output during
1CH mode, terminated internally at
PROMPTER 2/
75 ohms during 2CH mode, analog signal,
VBS-RET
1.0 Vp-p, 75 ohms
Output connectors
AUDIO OUT CH1, XLR 3-pin, male (2), 0 dBu/–20 dBu/
CH2 +4 dBu
CHARACTER/SYNC BNC type (1), VBS, 1 Vp-p, 75 ohms
AES/EBU BNC type (1), AES/EBU format
SDI OUT 1 to 4 3G/HD/SD SDI OUTPUT
BNC type (4)
3G SDI: SMPTE ST424/425 Level-A/B,
0.8 Vp-p, 75 ohms, 2.970 Gbps/
2.967 Gbps
HD SDI: SMPTE ST292, 0.8 Vp-p,
75 ohms, 1.485 Gbps/1.4835 Gbps
SD SDI: SMPTE 259M, 0.8 Vp-p, 75 ohms,
270 Mbps
3G SDI/HD SDI/SD SDI, character signal
selectable
UHD SDI A, B, E, F 12G/6G/3G/HD SDI OUTPUT
BNC type (2)
12G SDI: SMPTE ST2082, 0.8 Vp-p,
75 ohms, 11.88 Gbps/11.868 Gbps
6G SDI: SMPTE ST2081, 0.8 Vp-p,
75 ohms, 5.940 Gbps/5.934 Gbps
3G SDI: SMPTE ST424/425 Level-A/B,
0.8 Vp-p, 75 ohms, 2.970 Gbps/
2.967 Gbps
HD SDI: SMPTE ST292, 0.8 Vp-p,
75 ohms, 1.485 Gbps/1.4835 Gbps
85