Sony HDCU5000 Operating Instructions Manual page 6

Connection example (IP connection)
a)
Supported cameras
HDC5500
HDC3500 with HKC-FB50 installed
a)
Supported cameras
HDC3500/3100, HDC2000 series
a)
Supported cameras
HDC5500
HDC3500 with HKC-FB50 installed
Optical fiber cable
LAN cable
a) Signal transfer up to a maximum of 4 km is possible when using the HDCU5000, or 2 km when using the HDCU5500/3500. However, the actual transfer
distance may vary depending on the system configuration of the cameras and the type of optical fiber cables used.
b) HDC2000 series (HDC2000/2580/2500/2400/1700) support optical fiber connection.
c) Install the HKCU-SFP50 ST 2110 Interface Kit.
d) Connect to the LAN 1 and LAN 2 connectors of the HKCU-SFP50 ST 2110 Interface Kit.
e) Connect to the LAN COM connector of the HDCU5000/5500/3500.
f) To support SNMP monitoring, install HZCU-SNMP50 SNMP Agent Software (option).
g) To support Ember+ control, install HZCU-CNFG50 Config Control Software (option).
c)
HDCU5000
HDCU3500
b)
HDCU5500
MSU-1000 series
Master Setup Unit
d)
d)
e)
d)
d)
e)
c)
d)
d)
e)
c)
6
Audio Mixer
Multi Viewer
Video Server
IP switch
10G/25G
PTP Master × 2
× 2
IP Live System
Manager × 2
IP Intercom
IP switch
10G/1G
IP Tally System
SNMP Manager
IP switch
1G
Ember+ software
f)
g)