Sony HDCU5000 Operating Instructions Manual page 70

AUDIO/INTERCOM
Page name Item
Page No.
<FRONT INTERCOM> MIC/PGM
A04
I/F
PRIVATE SW
INTERCOM MIC
INTERCOM MIC
TYPE
INTERCOM MIC
GAIN
SIDE TONE LEVEL
PGM MIX MODE
PGM SELECT
PGM1 LEVEL
PGM2 LEVEL
PGM3 LEVEL
<TEST TONE> SOURCE
A05
LEVEL
ANALOG OUT CH
IP OUT CH
Set value
(PGM ON), (MIC OFF), (MIC ON)
(PROD), (ENG), (PRIVATE)
ENABLE,
DISABLE(SET TO ENG),
DISABLE(SET TO PROD)
DYNAMIC, ECM, CARBON
BALANCED, UNBALANCED
–6, 0, +6 dB
0 to 99 50
OFF, INCOM+PGM,
L-INCOM/R-PGM
PGM1, PGM2, PGM3,
PGM1+PGM2+PGM3
0 to 99, 50
0 to 99, 50
0 to 99, 50
1kHz
0, –10, –20, –30, –40, –50, –60,
–70 [dB]
NONE, ALL, MIC1, MIC2,
AES/EBU1, AES/EBU2,
INTERCOM ENG, INTERCOM
PROD
NONE, ALL, MIC1, MIC2,
AES/EBU1, AES/EBU2,
INTERCOM ENG, INTERCOM
PROD
70
Description
Front panel MIC/PGM switch position (Display only)
Front panel INTERCOM switch position. (Display
only)
Operation when the INTERCOM switch on the front
panel is set to the PRIV (private) position.
ENABLE: Private operation
DISABLE(SET TO ENG): ENG line operation
Sets the headset microphone connected to the
INTERCOM connector on the front panel.
CARBON: Carbon microphone (power supply, 20 dB
gain)
ECM: Electret condenser microphone (power supply,
40 dB gain)
DYNAMIC: Dynamic microphone (no power supply,
60 dB gain)
Sets the headset microphone connected to the
INTERCOM connector on the front panel.
BALANCED: Balanced microphone
UNBALANCED: Unbalanced microphone
Sets the microphone input gain.
Sets the side tone level.
OFF: Signals are not mixed.
INCOM+PGM: INCOM and PGM signals are mixed.
L-INCOM/R-PGM: Outputs INCOM signal through
the left channel and PGM signal through the right.
Selects the PGM audio output from the FRONT
INTERCOM connector.
Sets the MIX level of PGM1.
Sets the MIX level of PGM2.
Sets the MIX level of PGM3.
Sets the audio source of the test tone.
Sets the level of the test tone.
Sets the analog output channel of the test tone.
Sets the IP output channel of the test tone.