Install The Load Sense Hose - Raven SmarTrax Installation Manual

Chapter 3
Tank Hose Installed
FIGURE 8.
Tank Connections
Install the M16 x 1.5" (M) to -6 ORFS (M) straight adapter fitting (P/N 333-0012-339) in the open port of the
2.
rear differential housing.
Install the 90° end of the supplied hydraulic hose (P/N 214-1000-494) on the installed adapter fitting.
3.
Connect the straight end of the installed hydraulic hose to the fitting installed in Port T of the SmarTrax
4.
valve.

Install the Load Sense Hose

Machine's Existing Load Sense Connection
FIGURE 9.
Disconnect the existing load sense steel line from the bottom of the machine's hydraulic valve at the rear of
1.
the tractor.
14 John Deere 7X20 (Large Frame) SmarTrax™ Installation Manual