Install The Load Sense Hoses - Raven SmarTrax Case IH Titan 4030 Installation Manual

Install the Load Sense Hoses

Load Sense Port on the Steering Orbital
FIGURE 8.
Disconnect the machine's load sense hose from the steering orbital.
1.
SmarTrax Valve Load Sense Hose Connections
FIGURE 9.
Connect the machine's load sense hose to the fitting installed in Port LSPV on the SmarTrax valve.
2.
Install the straight end of the supplied hydraulic hose (P/N 214-1000-316) on the open port of the steering
3.
orbital.
Connect the 90° end of the installed hydraulic hose to the fitting installed in Port LS STEER of the SmarTrax
4.
valve.
Manual No. 016-4001-127 Rev. B
Hydraulic System Installation
LS STEER
LSPV
15