How To Place Documents (Sv600) - Fujitsu ScanSnap iX1500 Basic Operation Manual

How to Place Documents (SV600)

When you place down documents, use the Background Pad.
If you scan documents without using the Background Pad, the document edges may not be detected
correctly and the created scanned image may be different from the document.
For details about documents that can be scanned with the ScanSnap, refer to
(SV600)" (page 254).
l "Scan Area" (page 255)
l "When Placing a Standard Size Document" (page 256)
l "When Placing a Book" (page 256)
l "When Placing Multiple Documents at Once" (page 256)
Scan Area
Place documents with the scanned side face-up in the following scan area.
Use the following to determine the scan area.
l Area: Reference marks of the Background Pad
l Height: Lines on the base of the ScanSnap
400 mm
(15.75 in.)
432 mm
(17.01 in.)
ATTENTION
If a document is placed outside of the scan area, part of the scanned image may be left out or blurred.
300 mm (11.81 in.)
255
Scanning Documents with SV600
"Documents to Scan
Line
30 mm (1.18 in.)
5 mm (0.2 in.)