Fujitsu ScanSnap iX1500 Basic Operation Manual page 97

HINT
To continue using the ScanSnap, reset the time until auto power-off by performing one of the following:
l Insert a document in the ScanSnap
l Press the [Scan/Stop] button on the ScanSnap
l Close the feed guide and open it again
SV600
To turn the ScanSnap back on, perform one of the following operations:
l Press the [Scan] button on the ScanSnap (this will not start scanning)
l Press the [Stop] button on the ScanSnap.
HINT
To continue using the ScanSnap, reset the time until auto power-off by pressing the [Scan] button on
the ScanSnap.
Changing the ScanSnap's Power Settings
iX1500
1. Click the ScanSnap Manager icon
keyboard, and select [Quit] from the
a ScanSnap Manager exits.
2. Press on the
3. Press
4. Press [Automatic power off] to display the [Automatic power off] screen.
5. Press the setting field for [ScanSnap will automatically power off] to display a list.
6. Change the setting.
7. Press to return to the home screen.
iX500/iX100/SV600/S1300i
You can change the time of the ScanSnap to turn off automatically or change the setting so that it
will not turn off automatically. Set according to the following procedures:
1. Click the ScanSnap Manager icon
keyboard, and then select [Preferences] from the
a The [ScanSnap Manager - Preferences] window appears.
"ScanSnap Manager Menu" (page
touch panel of the ScanSnap to display the [Settings] screen.
to display the [Scanner settings] screen.
in the Dock while holding down the [control] key on the
in the Dock while holding down the [control] key on the
"ScanSnap Manager Menu" (page
97
Turning the ScanSnap On or Off
84).
84).