Screens On The Touch Panel (Ix1500) - Fujitsu ScanSnap iX1500 Basic Operation Manual

Screens on the Touch Panel (iX1500)

The screens displayed on the touch panel of the ScanSnap are either the home screen to start
scanning or the [Settings] screen to check or modify the settings of the ScanSnap.
This section explains the following screens:
"Home screen" (page 101)
l
l "[Settings] Screen" (page 103)
Home screen
The home screen is a screen where you perform a scan.
Header (1)
Displays the connection statuses of the ScanSnap.
Displays the signal status between a wireless access point and the ScanSnap in four levels.
When the ScanSnap is searching for a wireless access point or is not connected to a wireless
access point,
Appears when the ScanSnap and the computer are connected via a USB cable.
Appears when the ScanSnap and the computer or mobile device are connected directly via
wireless LAN.
Status (2)
Displays the connection status of a computer or mobile device that is occupying the ScanSnap.
appears.
Screens and Operations on the Touch Panel (iX1500)
101
1
2
3