Connecting The Scansnap To A Wireless Lan (Ix500/Ix100) - Fujitsu ScanSnap iX1500 Basic Operation Manual

Connecting the ScanSnap to a Wireless LAN (iX500/
iX100)
The ScanSnap Wireless Setup Tool is an application to configure the wireless settings required for
connecting your ScanSnap via wireless LAN in a wizard format. The ScanSnap Wireless Setup Tool
can be used to configure and check the following wireless LAN settings and connection.
l Connecting the ScanSnap to a wireless access point
l Registering the computer that will be connected to the ScanSnap via wireless LAN
l Setting the IP address, name, and password for the ScanSnap
l Checking the connection between the ScanSnap and the computer (iX100)
l Checking the connection between the ScanSnap and the mobile device
Follow the procedure below to start the ScanSnap Wireless Setup Tool and configure the wireless
settings.
1.
From the sidebar in Finder, select [Applications] → [ScanSnap], and then
double-click [ScanSnap Wireless Setup Tool].
a The ScanSnap Wireless Setup Tool will start running.
2.
Click the [Wireless Network Setup Wizard] button
menu.
a The Wireless Network Setup Wizard appears.
3.
Follow the instructions in the Wireless Network Setup Wizard to configure
the wireless settings.
For iX100, configure and check the wireless settings based on the wireless LAN environment
in which the ScanSnap is used.
HINT
l For details and operation of ScanSnap Wireless Setup Tool, refer to the ScanSnap Wireless Setup
Tool Help.
l The ScanSnap Wireless Setup Tool is also started up when the ScanSnap software is installed.

Connecting the ScanSnap to a Wireless LAN (iX500/iX100)

127
in the main