Cleaning The Inside Of Ix100 - Fujitsu ScanSnap iX1500 Basic Operation Manual

Cleaning the Inside of iX100

Scanning repeatedly may cause dust and paper dust to accumulate inside the ScanSnap resulting in
a scanning error.
As a guideline, the inside of the ScanSnap should be cleaned every 100 sheets scanned. Note that
this guideline varies depending on the types of documents you scan. For instance, it may be
necessary to clean the scanner more frequently when you scan documents on which the toner is not
sufficiently fused.
Do not use aerosol spray or spray that contains alcohol to clean the scanner.
Paper dust and other dust blown up by strong air from the spray may enter the
inside of the scanner which may cause scanner failure or malfunction.
Also note that sparks generated by static electricity may cause a fire.
ATTENTION
l Do not use water or mild detergent to clean the inside of the ScanSnap.
l It may take a long time for Cleaner F1 to dry if an excessive amount is used. Moisten the cloth with
moderate quantity.
Wipe off the cleaner completely to leave no residue on the cleaned parts.
HINT
To check the number of sheets scanned with the ScanSnap, see [Total Page Count] in the [ScanSnap
Manager - Scanner and driver information] window.
To open the [ScanSnap Manager - Scanner and driver information] window, click the ScanSnap
Manager icon in the Dock while holding down the [control] key on the keyboard, and click [Help]
→ [ScanSnap information] from the
1.
Clean the glass and idler rollers.
1. Open the feed guide.
The ScanSnap is turned on and a roller rotation sound comes out of the ScanSnap.
After the sound stops, proceed to the next step.
2. Open the top cover and output guide.
"ScanSnap Manager Menu" (page
396
Cleaning iX100
84).