Fujitsu ScanSnap iX1500 Basic Operation Manual page 294

2. Load the documents at the center of the ADF paper chute (cover).
ATTENTION
l Load all documents over one another above the pick roller (center). Documents that are not
loaded above the pick roller cannot be fed.
Pick Roller Assembly's Width
l Adjust the side guides to the widest document. If the side guides are not adjusted properly, a
paper jam may occur.
l Load smaller documents so that they can be scanned straight.
If the documents are skewed during scanning, the following problems may occur:
- Part of the document does not appear in the scanned image
- Slant lines appear in the scanned image
Incorrect
294
Scanning Documents with S1300i