Updating The Firmware - Fujitsu ScanSnap iX1500 Basic Operation Manual

Updating the Firmware

Update the ScanSnap firmware to add new features or improve features and operational
performance.
If the ScanSnap is connected to the Internet, the firmware can be updated on the touch panel of the
ScanSnap.
l "To check the latest information on the firmware" (page 442)
l "To update the firmware" (page 442)
To check the latest information on the firmware
Checking the latest information on the firmware in advance allows you to decide whether or not the
firmware needs to be updated.
For the latest information on the firmware, refer to here.
To update the firmware
ATTENTION
l Do not perform the following operations while updating the firmware. Otherwise, the firmware data
may be corrupted.
- Turning off the ScanSnap
- Disconnecting the ScanSnap from the Internet by turning off the wireless access point or
changing the settings
HINT
l If you use the software related to the ScanSnap, apply the latest updates to the software as well.
For details, refer to
1. Click the ScanSnap Manager icon
keyboard, and select [Quit] from the
a ScanSnap Manager exits.
2. Press on the
3. Press
4. Press [Update firmware] to display the [Update firmware] screen.
If [Unknown] is displayed for the latest version for [Latest version/Current version], check
whether the ScanSnap is connected to the Internet.
5. Press the [Update] button.
a Updating the firmware starts.
"Updating the Software" (page
"ScanSnap Manager Menu" (page
touch panel to display the [Settings] screen.
to display the [Maintenance] screen.
441).
in the Dock while holding down the [control] key on the
442
Updating the Firmware
84).