Scansnap Setup Window - Fujitsu ScanSnap iX1500 Basic Operation Manual

ScanSnap Setup Window

When you click the ScanSnap Manager icon
keyboard, and then select [Settings] from the
ScanSnap setup window appears.
In the ScanSnap setup window, you can use the [Use Quick Menu] checkbox to specify whether or
not to use the Quick Menu. You can also use the profile buttons and detail setting tabs to specify
scan settings according to your scanning needs.
For details, refer to the ScanSnap Manager Help.
Example: ScanSnap setup window for iX500
HINT
For SV600, when SV600 and either iX1500, iX500, iX100, S1300i, or S1100i are connected to a
computer, you can change the scan settings for each of the ScanSnap models that are connected by
selecting the model name from [Scanner] on the ScanSnap setup window.
while holding down the [control] key on the
"ScanSnap Manager Menu" (page
Profile Buttons
Detail Setting Tabs
86
ScanSnap Setup Window
84), the following