Documents To Scan (Ix500) - Fujitsu ScanSnap iX1500 Basic Operation Manual

Documents to Scan (iX500)

This section explains about the conditions for documents that can be loaded directly into the
ScanSnap and the conditions for documents that can be scanned using the Carrier Sheet.
Documents That Can Be Loaded Directly into the ScanSnap
Conditions for documents that can be loaded directly into the ScanSnap are as follows:
Document type Office paper, postcards, business cards
Plastic cards conforming to the ISO7810 ID-1 type (54 × 86 mm)
Paper weight
40 to 209 g/m
Long page documents
52 to 128 g/m
A8 size (52 × 72 mm) or less
128 to 209 g/m
Plastic cards
0.76 mm (0.03 in.) or less (embossed cards can be used)
Paper size
Width
50.8 to 216 mm (2 to 8.5 in.)
Length
50.8 to 360 mm (2 to 14.17 in.)
For long page (*1), up to 863 mm (34 in.)
*1: Scanning starts when you hold down the [Scan] button on the ScanSnap for 3 seconds or longer.
If you scan a magnetic card or IC card, do not bring the black magnetic part in
contact with the magnetic part of the ADF top section. Otherwise, the data on
the card may be lost.
2
(10.7 to 55.7 lb)
2
(13.9 to 33.9 lb)
2
(33.9 to 55.7 lb)
198
Scanning Documents with iX500
Magnets