Fujitsu ScanSnap iX1500 Basic Operation Manual page 44

2
Installing the Software/Connecting the ScanSnap
1. Run the installer that you saved on your computer.
2. Follow the instructions on the [ScanSnap Installer] window that appears.
When you are asked whether you accept the license agreement terms, read the confirmation
message and select [I agree to all terms and conditions].
3. When [Installation complete] appears, click the [Complete] button.
4. Follow the instructions on the [ScanSnap - Connecting the ScanSnap] window to connect the
ScanSnap to a computer.
HINT
If there are available updates for ScanSnap Online Update on the server, you will be asked whether
you accept the license agreement terms for ScanSnap Online Update.
For details about ScanSnap Online Update, refer to the ScanSnap Online Update Help.
3
Checking the Scanning Operation
1. Insert a document in the ScanSnap.
Insert a document straight into the feeding section of the ScanSnap, with the scanning side
facing up.
For details about how to scan a document, refer to
297).
2. Press the [Scan/Stop] button to start scanning.
To continue scanning, insert the next document to be scanned. When the document is inserted,
scanning starts automatically.
When the scanning of documents is complete, press the [Scan/Stop] button to finish scanning
documents.
"Scanning Documents with S1100i" (page
44
Setting Up S1100i