Fujitsu ScanSnap iX1500 Basic Operation Manual page 250

4.
Click the [Apply] button in the ScanSnap setup window.
5.
Click the [ ] button in the upper left of the window to close the ScanSnap
setup window.
6.
Place the document inside the Carrier Sheet.
Open the Carrier Sheet and place the top of the document against the top center of the Carrier
Sheet.
7.
Insert the part with the black and white pattern straight into the feeding
section of the ScanSnap, with the scanning side of the document inside the
Carrier Sheet facing up.
250
Scanning Documents with iX100