Scanning Documents Using Timed Mode (Sv600) - Fujitsu ScanSnap iX1500 Basic Operation Manual

Scanning Documents Using Timed Mode (SV600)

This section explains how to automatically start scanning by setting the time period for the document
scanning to start.
1.
Click the ScanSnap Manager icon
[control] key on the keyboard, and select [Settings] from the
Manager Menu" (page
a The ScanSnap setup window appears.
2.
In the "ScanSnap Setup Window" (page
click the [Option] button.
a The [Scanning mode option] window appears.
3.
Set the time period before the ScanSnap starts scanning a document.
l To set the time period before the ScanSnap starts scanning a document after the [Scan]
button is pressed:
Select the [Specify the waiting time to start scanning after pressing the [Scan] button]
checkbox, and then specify [Waiting time].
in the Dock while holding down the
84).
277
Scanning Documents with SV600
86), select the [Scanning] tab, and
"ScanSnap