Screens And Operations On The Touch Panel (Ix1500); Checking The Notification Displayed On The Touch Panel (Ix1500) - Fujitsu ScanSnap iX1500 Basic Operation Manual

Checking the Notification Displayed on the Touch Panel (iX1500)

When the glass inside the ScanSnap is dirty, replacement for consumables is needed, or the latest
firmware is available, a notification is displayed on the touch panel of the ScanSnap.
When there is a notification,
When a notification is displayed, check the content and take measures accordingly.
1.
Click the ScanSnap Manager icon
[control] key on the keyboard, and select [Quit] from the
Menu" (page
a ScanSnap Manager exits.
2.
Press on the touch panel of the ScanSnap to display the [Settings]
screen.
3.
Press
4.
Press the menu on which
a When the glass is dirty,
When the consumables need to be replaced,
status].
When the latest firmware is available,
5.
Check the content of the notification and then clean the glass, replace the
consumables, or update the firmware.
For details about how to clean the ScanSnap, replace the consumables, or update the
firmware, refer to the following:
l "Cleaning the Inside of iX1500" (page 383)
"Replacing Consumables for iX1500" (page 417)
l
l "Updating the Firmware" (page 442)
HINT
l You can set whether to detect when the glass is dirty and display a notification on the touch
panel with [Notify when glass is dirty] in the [Dust detection] screen.
l You can set whether to display a notification on the touch panel when the latest firmware is
available with [Notify when the latest is available] in the [Update firmware] screen.
appears on
84).
to display the [Maintenance] screen.
is displayed.
is displayed on [Dust detection].

Screens and Operations on the Touch Panel (iX1500)

.
in the Dock while holding down the
is displayed on [Check consumable
is displayed on [Update firmware].
106
"ScanSnap Manager