Cleaning The Outside Of Ix1500 - Fujitsu ScanSnap iX1500 Basic Operation Manual

Cleaning the Outside of iX1500

ScanSnap
Clean the outside of the ScanSnap, the ADF paper chute (cover), the ADF top section, and the
stacker in the following procedure.
Disconnect the cables from the ScanSnap and then clean the outside of the ScanSnap with a dry
cloth, or a cloth moistened with Cleaner F1/mild detergent.
ATTENTION
l Never use paint thinner or any other organic solvents. The shape or color may be changed.
l When cleaning the ScanSnap, prevent liquids from entering the ScanSnap.
l It may take a long time for Cleaner F1 to dry if an excessive amount is used. Moisten the cloth with
moderate quantity. Wipe off the cleaner completely with a soft cloth to leave no residue on the
cleaned parts.
Touch Panel
To avoid the surface of the touch panel becoming dirty, clean it regularly by gently wiping dirt and
dust off with a soft, dry cloth.
Do not rub or tap the surface with hard objects as doing so may damage the surface.
ATTENTION
Do not wipe the touch panel with a damp cloth.
Dust on the surface may become stuck between the touch panel and the ScanSnap, causing the touch
panel to malfunction.
Cloth
382
Cleaning iX1500
Cleaner F1 or
Mild Detergent