Fujitsu ScanSnap iX1500 Basic Operation Manual page 397

Table of Contents

Advertisement

Feed Guide
3. Clean the following locations with a cloth moistened with Cleaner F1.
Glass (x 2)
l Glass (× 2, one on the top cover and one on the opposite side)
Gently wipe the dirt and dust off the surface of the glass sections.
l Idler roller (× 12, located on the top cover)
Gently wipe the dirt and dust off the rollers as you rotate them manually. Be careful not
to damage the surface of the rollers. Make sure that they are cleaned properly because
residue on the rollers will affect the feeding performance.
2.
Clean the feed rollers and eject rollers.
1. Press the [Scan/Stop] button for 3 seconds with the top cover open.
2. Clean the following locations with a cloth moistened with Cleaner F1.
Top Cover
Output Guide
Idler Roller (x 12)
397
Cleaning iX100

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents