Scanning Documents (S1100I) - Fujitsu ScanSnap iX1500 Basic Operation Manual

Scanning Documents (S1100i)

The procedure for scanning documents by inserting one document at a time is as follows.
For details about documents that can be scanned, refer to
298).
1.
Open the feed guide of the ScanSnap.
HINT
l If you want the document to be ejected from the front of the ScanSnap or when there is not
enough space where the document exits the ScanSnap, open the output guide.
For details about documents that can be scanned with the output guide open, refer to
"Documents to Scan (S1100i)" (page
l How the document is ejected differs as below depending on whether the output guide is open
or closed.
- When the output guide is closed
- When the output guide is open
a The [Scan/Stop] button flashes in blue. The button returns to being lit normally when
document scanning is enabled.
In addition, the ScanSnap Manager icon in the Dock changes from
Feed Guide
298).
Output Guide
302
Scanning Documents with S1100i
"Documents to Scan (S1100i)" (page
to .