Fujitsu ScanSnap iX1500 Basic Operation Manual page 429

ATTENTION
Make sure that the pick roller is attached firmly. Otherwise, paper jams or other feeding
errors may occur.
6. Close the sheet guide.
Make sure that both sides of the sheet guide are locked firmly.
6.
Close the ADF top section.
a It clicks when it returns to its original position.
7.
Connect the power cable to the AC outlet, and turn on the ScanSnap.
8.
Reset the roller set count.
1. Click the ScanSnap Manager icon
on the keyboard, and then select [Check consumable status] from the
Menu" (page
a The [ScanSnap Manager - Check consumable status] window appears.
84).
Bushing
ADF Paper Chute (Cover)
ADF Top Section
in the Dock while holding down the [control] key
429
Replacing Consumables for iX500
"ScanSnap Manager