Cabling Ip4Ww-000E-B1; Cabling And Setting Ip4Ww-4Coidb-B1; Table 2-10 Rj-61 Analogue Pin-Outs (J101, J102); Figure 2-70 Connectors Of 4Coidb-B1 - NEC SL1100 Hardware Manual

SL1100
While an Analogue Telephone (port) is ringing or MW-lamp is flashing on an
Analogue Phone (port), do not disconnect the phone from the port and or
connect another type of the terminal to this port.
3.4.2.1 Connectors
The following table shows the pin-outs for the RJ-61 cable connector for Analogue extension
connections.
3.4.3

Cabling IP4WW-000E-B1

This IP4WW-000E-B1 PCB does not have any connection for cabling.
3.4.4

Cabling and Setting IP4WW-4COIDB-B1

This IP4WW-4COIDB-B1 PCB provides two RJ-61 connections for CO lines (J2) and PFT TEL (J3).
3.4.4.1 Connectors
The following table shows the pin-outs for the RJ-61 cable connector for CO (J2) and PF (J3)
connections.
2-44

Table 2-10 RJ-61 Analogue Pin-Outs (J101, J102)

Pin No.
1
2
3
4
5
6
7
8

Figure 2-70 Connectors of 4COIDB-B1

SLI 1-4 (J101), SLI 5-8 (J102): 2-Wire Analogue
Extension port Connector (RJ-61)
T4 (Tip for port 4)
T3 (Tip for port 3)
T2 (Tip for port 2)
R1 (Ring for port 1)
T1 (Tip for port 1)
R2 (Ring for port 2)
R3 (Ring for port 3)
R4 (Ring for port 4)
ISSUE 1.0
Installation