Mounting The Ip4Ww-Battery Box; Floor-Mounting The Ip4Ww-Battery Box; Figure 2-27 Connecting The Battery Connection Cable; Figure 2-28 Installation Of Front Cover - NEC SL1100 Hardware Manual

ISSUE 1.0
14. Align tabs a to f to holes A to F on Battery Box. Slide the Front cover and tighten the two screws.
2.6

Mounting the IP4WW-Battery Box

The IP4WW-Battery Box can be installed on either the floor or wall. One KSU can be mounted on an
IP4WW-Battery Box.
2.6.1

Floor-Mounting the IP4WW-Battery Box

Battery box can be mounted on the floor using the FM/WM Base-F, FM/WM Base-R and WM Support.
(Note: FM = Floor-Mount and WM = Wall-Mount)
1. Assemble the FM/WM Base-F, Base-R and WM Support.
Hardware Manual

Figure 2-27 Connecting the Battery Connection Cable

Figure 2-28 Installation of Front Cover

SL1100
2-19