Cabling Ip4[ ]-008E-B1; Table 2-9 Rj-61 Digital Connector Pin-Outs (J101, J102); Figure 2-69 Connectors Of 008E-B1 - NEC SL1100 Hardware Manual

ISSUE 1.0
3.4.1.1 Connectors
The following table shows the pin-outs for the RJ-61 cable connector for Digital extension connections.

Table 2-9 RJ-61 Digital Connector Pin-Outs (J101, J102)

3.4.2

Cabling IP4[ ]-008E-B1

This IP4[ ]-008E-B1 PCB provides two RJ-61 connections for analogue extensions.
Before plugging in the Multiline Telephone, DSS Console, Single line Telephone
or Doorphone, ensure Main KSU is powered off.
Only SL1100 terminals (12TXH, 24TXH) may be connected to a SL1100 digital
port. Do not connect any other terminal as damage may result.
Hardware Manual
Pin No. ESI 1-4 (J101), ESI 5-8 (J102): 2-Wire Digital Extension
1
2
3
4
5
6
7
8
J102 J101
SLI 5-8 SLI 1-4
5 4 3 6 2 7 1
Port 1 Port 2 Port 3 Port 4
T
T : Tip
R : Ring
5 6
SLT

Figure 2-69 Connectors of 008E-B1

Port Connector (RJ-61)
T4 (Tip for port 4)
T3 (Tip for port 3)
T2 (Tip for port 2)
R1 (Ring for port 1)
T1 (Tip for port 1)
R2 (Ring for port 2)
R3 (Ring for port 3)
R4 (Ring for port 4)
8
R
Modular Cable
(2-wire, Straight )
SL1100
2-43