SL1100
For the details of PZ-VM21 daughter board installation, refer to Installing the PZ-VM21 PCB.
1.
Turn the power off, insert the Customer Data CF card into the CF Slot on PZ-VM21.
2.
Turn the power on, enter the Program Mode then PRG90-04.
3.
Dial 1 and press Hold key.
4.
When the data backup to the CF card is completed, the display changes to the next PRG.
5.
Remove the CF card and exit from the Program Mode.
3-6
Figure 3-13 Inserting the CF card
Figure 3-14 PRG90-04 Display
Figure 3-15 Next PRG Display
ISSUE 1.0
System Start Up