Figure 2-55 Mounting The 1St Expansion Interface Card - NEC SL1100 Hardware Manual
Hide thumbs
Also See for SL1100:
- Features and specifications manual (864 pages) ,
- Programming manual (650 pages) ,
- Networking manual (292 pages)
Table of Contents
Advertisement
ISSUE 1.0
4.
Insert two Nylon-spacers into the specified holes, and fasten two Metal-spacers into the specified
holes. (Both Nylon and Metal spacers are provided with 080E/008E/000E/1PRIU)
If no more Expansion Interface cards are to be mounted on the 1st PCB,
fasten two screws to secure the 1st PCB on the top of the 080E/008E/000E/1PRIU.
5.
In case a 2nd PCB is mounted, insert two Nylon-spacers into the specified holes, and fasten two
Metal-spacers into the specified holes. (Both Nylon and Metal spacers are provided with
080E/008E/000E/1PRIU)
Fasten two screws to secure the 2nd PCB to the top of the 080E/008E/000E/1PRIU.
Hardware Manual
Figure 2-55 Mounting the 1st Expansion Interface Card
SL1100
2-35
Advertisement
Table of Contents
