Disengage Sensor; Wheel Angle Sensor; Operator Presence Switch - Raven RS1 Calibration And Operation Manual

DISENGAGE SENSOR

Status of the pressure sensor used to disable steering when the steering wheel is turned.
Display

WHEEL ANGLE SENSOR

Displays the status of the position sensor.
Display

OPERATOR PRESENCE SWITCH

Displays the status or presence of the operator presence switch.
Display
016-4010-001 Rev. E
The SC1/TC1 disengage sensor is active. The SC1/TC1 system
cannot be enabled.
The SC1/TC1 disengage sensor is out of range or disconnected.
The SC1/TC1 disengage sensor is inactive. The SC1/TC1 system
can be enabled.
The wheel angle sensor (WAS) is out of range or disconnected.
Wheel angle sensor (WAS) is not calibrated.
The wheel angle sensor (WAS) is calibrated and ready to
operate.
The presence switch is not available or not used with the
selected machine profile.
The operator is not present in the seat.
DIAGNOSTICS AND TROUBLESHOOTING
Message
Message
Message
51