Raven RS1 Calibration And Operation Manual page 25

Hide thumbs Also See for RS1:

Table of Contents

FIGURE 22. Center WAS Calibration Screen

4. Drive forward between 1 - 4 mph with the machine's wheels pointing straight ahead.

5. Press the Center button to set the center WAS value.

NOTE:

Do not turn the steering wheel until the WAS screen advances to the Right WAS setting.

FIGURE 23. Right WAS Calibration Screen

6. Drive forward between 1 - 4 mph.

7. Turn the steering wheel all the way to the right steering lock.

8. Press the Right button to set the right WAS value.

NOTE:

Do not turn the steering wheel until the following Calibration Complete screen is displayed:

016-4010-001 Rev. E

CALIBRATION - HDU-SPECIFIC, MD, AND STEERING-READY

Table of Contents