Raven RS1 Calibration And Operation Manual page 18

Hide thumbs Also See for RS1:

Table of Contents

HAPTER

FIGURE 6. Antenna Center Offset Screen

6. Select the value box to enter the Antenna Center Offset position.

NOTE:

The Antenna Center Offset position is calculated by measuring from the center of the machine to the

center of the RS1 unit. Enter a negative value if the RS1 unit is located to the left of the machine's

center line.

7. Select the Next arrow.

FIGURE 7. Antenna Height Screen

8. Select the value box to enter the Antenna Height.

NOTE:

The Antenna Height is calculated by measuring from the ground to the center of the RS1 unit.

9. Select the Next arrow.

Raven RS1™ Calibration and Operation Manual

Table of Contents