Raven RS1 Calibration And Operation Manual page 19

Hide thumbs Also See for RS1:

Table of Contents

FIGURE 8. Wheel Base Screen

10. Select the value box to enter the Wheel Base.

NOTE:

The Wheel Base is calculated by measuring from the center of the front tire to the center of the rear

tire on both sides of the machine. Add these measurements together and then divide by two to get

the average Wheel Base value.

11. Select the Next arrow.

FIGURE 9. GPS Differential Configuration Screen

12. Select the appropriate GPS Differential Source from the drop-down box:

•

GL1DE®

•

SBAS

•

Satellite GS

•

RTK

NOTE:

Depending on the number of feature unlocks purchased, all options may not be available for

selection in the drop-down box. Contact your local Raven dealer to purchase additional unlock codes.

13. Select the Next arrow.

016-4010-001 Rev. E

CALIBRATION - HDU-SPECIFIC, MD, AND STEERING-READY

Table of Contents