Raven RS1 Calibration And Operation Manual page 17

Hide thumbs Also See for RS1:

Table of Contents

FIGURE 4. Steering Configuration Screen

2. Verify that the correct steering controller partner has been identified:

•

OEM TECU (tractor's electronic control unit)

•

Sauer Danfoss CL/CLS Valve

•

SmarTrax MD

•

SmarTrax HD Analog

•

SmarTrax HD PWM

3. Select the Next arrow.

FIGURE 5. Antenna Fore/Aft Screen

4. Select the value box to enter the Antenna Fore/Aft position.

NOTE:

The Antenna Fore/Aft position is calculated by measuring from the rear axle of the machine to the

middle of the RS1 unit. Enter a negative value if the RS1 unit is located behind the rear axle.

5. Select the Next arrow.

016-4010-001 Rev. E

CALIBRATION - HDU-SPECIFIC, MD, AND STEERING-READY

Table of Contents