Controlling The System Via N-Link; Control By Duress Access Control - jablotron JA-10 Series Manual

JA-10:
Status:
UNSET
Section 1: Unset;
(control of the
Section 2: Unset;
whole system)
Section 3: Unset;
Section 4: Unset, Error;
Authorization:
GSM: 90%;
All
Time 17:01 22.7.
JA-10:
SET 1 3
Status:
(control of
Section 1: Set;
selected system
Section 3: Set with an active zone;
sections)
GSM: 90%;
Time 17:01 22.7.
Authorization:
All
JA-10:
UNSET 2 4
Status:
(control of
Section 2: Unset;
selected system
Section 4: Unset;
sections)
GSM: 90%;
Authorization:
Time 17:01 22.7.
All
CREDIT JA-10:
(checking the ...
credit balance
...
on the pre-paid
...
SIM card)
Time 17:01 22.7.
Authorization:
All

9.8 Controlling the system via N-Link

N-Link SW is used for local and remote programming of the whole system or user editing; provide an overview
of section statuses and section control. Control is possible by clicking on the "Section" tab in the "status" column
or also by clicking on the number of the section on the lower status bar. The system records system control to
its event memory according to authorization upon user authorization in the software.

9.9 Control by Duress access control

This option, switched off by factory default, enables users to control (set or unset) the system with a different
code when they are threatened by another person. This code will unobtrusively draw attention to such
a situation by triggering a silent Panic alarm without any acoustic or visual indication. A panic alarm is triggered
by adding 1 to an existing user code.
Example:
User code = 4444. Duress access control code = 4445
Warning: If the user code ends with the number 9 when using Duress access control, then the last number of
the code will be 0.
JA-14K(R) Security System Control Panel
Installation name according to the Communication tab
Status:
Name and status of Section 1
Name and status of Section 2
Name and status of Section 3
Name and status of Section 4
GSM signal quality
Time and date of sending the SMS to the GSM network
Installation name according to the Communication tab
Status:
Name and status of Section 1
Name and status of Section 3
GSM signal quality
Time and date of sending the SMS to GSM
Installation name according to the Communication tab
Status:
Name and status of Section 2
Name and status of Section 4
GSM signal quality
Time and date of sending the SMS to GSM
Installation name according to the Communication tab
Text from GSM provider response
Text from GSM provider response
Text from GSM provider response
Time and date of sending the SMS to GSM
36 / 72 MNX22101