Table of Contents
Advertisement
2. OPERATING THE JABLOTRON 100 + SYSTEM
2.3.1 OPERATING THE SYSTEM USING
THE MyJABLOTRON SMARTPHONE APP
Once a user account is created, the user can remotely monitor and control
the system via the MyJABLOTRON app for Android and iOS smartphones.
The app can be downloaded free of charge from Google Play or App Store.
Authorization of the user can be done not only by entering a user code but
also with a technology offered by the smartphone, depending on the smartphone
type (fingerprint, face ID etc.).
Once logged into the account, you will see all active devices which can
be monitored or controlled.
Each widget represents one service. Tapping the widget will open Controls tab with an overview
of the service. The menu is divided into bookmarks according to the configuration of the system.
(Sections, Keypads, Automation (PG), Thermostats and thermometers, Meters). In the bottom bar you can
switch between Control, History and Gallery tabs.
The app allows the user to place a widget on a home screen with a direct link to control a selected section
or to show a selected function without having to open the app.
2.3.2 OPERATING THE SYSTEM VIA THE MyJABLOTRON WEB INTERFACE
The JABLOTRON 100 + system can be easily and conveniently operated using
your computer via the internet and the MyJABLOTRON web interface, which
is accessible from www.myjablotron.com.
Once logged into the account, you will see all active devices which
can be monitored or controlled.
The "Overview" menu includes "Section", and "History" tabs. Depending
on the type of detectors used, the menu may also include tabs like "Keypads",
"Automation (PG)", "Thermostats and thermometers", "Meters" and "Gallery".
The bottom of the home page has an overview of the most recent system
events.
MyJABLOTRON offers free notifications (SMS, e-mail, or push notifications)
for selected system section events, programmable outputs, thermometers or meters. These notifications can
be set up in the "Settings" menu.
Each system can have only one main user with Administrator rights (owner). This user has the right
to share a whole building or its selected parts (single sections, PG outputs, photo verification and measuring
devices) with other users whose MyJABLOTRON accounts will be created automatically after the system
sharing is configured. If a user already has a MyJABLOTRON account, the shared installation will appear
in the user's dashboard as another active device. Notification of shared access will be sent, along with
the password, to the e-mail address (login name) of the new user.
2.3.3 OPERATING THE SYSTEM USING THE VOICE MENU
The system can be controlled from a phone through a voice menu, which guides
the user through a series of options in the preconfigured language. To access
the voice menu, you just dial the alarm system's phone number.
Access to the voice menu can be enabled either to all telephone numbers
without restrictions or alternatively only to authorized phone numbers stored
in the control panel. Depending on the configuration, authorization by entering
a valid code on a phone keypad may be required. When the user enters
the menu, the system will give an update of the current status of all sections
assigned to the user. The caller then can control these sections, either
individually or collectively, using phone keypad and available menu options.
The system default is set up to answer incoming calls after three rings
(approximately 15 seconds).
19
Hide quick links:
Advertisement
Table of Contents
