Operating The System With A Keyfob; Operating The System Using A Computer And A Usb Cable (J-Link); Operating The System Using The Voice Menu - jablotron 100 User Manual

8 OPERATING THE JABLOTRON 100 SYSTEM

OPERATING THE SYSTEM WITH A KEYFOB

The installer must program the keyfob into the system. The keyfob can be
linked to specifi c users, thus avoiding text message notifi cation to the user
who is interacting with the system (if notifi cation parameters are set up in this
way). The keyfob can provide either two-way communication, confi rming the
execution of a command with a coloured indicator light, or one-way without
any feedback. Keyfobs control and indicate battery status and are equipped
with optical indication, the two-way keyfob also with an acoustic indication.
The button functions are differentiated using the lock icon. The closed lock
icon sets the alarm; the open lock icon unsets the alarm. The solid and hollow
circle icons serve to control one programmable device (e.g. turn the lights on
and off) or two programmable devices (e.g. a garage door and front door lock).
The buttons on the keyfob can be locked to prevent accidental pressing (child
safety lock). For more detailed information, see the specifi c keyfob manuals.
OPERATING THE SYSTEM USING A COMPUTER
AND A USB CABLE (J-LINK)
The JABLOTRON 100 can be operated locally or remotely using a computer
and an installed J-Link program, which can be used to manage users (change
codes, card/tags, and phone numbers). For local use, J-Link is available on
the security system's disk drive. When a computer is connected via USB
to the control panel, the system will automatically prompt you to install J-Link.
If a keypad with at least one controllable segment is used with the system,
then it is possible to set/unset the system in J-Link using an on-screen virtual
keypad (click on "Keypad" in the main menu).

OPERATING THE SYSTEM USING THE VOICE MENU

The system can be controlled from a mobile or land line through a simple
voice menu, which guides the user through a series of options in the preset
language. To access the voice menu, you just dial the alarm system's phone
number.
Access to the voice menu can be enabled either to accept any incoming call
without restriction, or, alternatively, to only accept authorized phone num-
bers stored in the system. In the fi rst scenario, the caller must enter their user
authorization code (using their phone pad); in the second case, further authori-
zation is not required.
Once the authorization process is complete, the voice system will give an
update of the current status of all sections assigned to the user. The caller can
then control these sections, either individually or collectively, using their phone
pad and the available voice menu options.
The system default is set up to answer incoming calls after three rings
(approximately 15 seconds).