Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for jablotron Azor
Summary of Contents for jablotron Azor
- Page 1 Obalka EN - filan.indd 1 Obalka EN - filan.indd 1 6.6.2011 12:29:30 6.6.2011 12:29:30...
-
Page 2: Table Of Contents
Battery replacement AZ-10D RFID tag reader ..................5 If the batteries in any detector are low, Azor sends an SMS message and it is optically AZ-10M door-opening detector ................5 signalled by the detector. Azor must be unset during battery replacement. When you open AZ-10P motion detector ..................6... -
Page 3: Description
AZ-10S optical smoke detector If you decide to adjust Azor’s behaviour to suit your needs, you just need to connect it to a power supply AA 1.5V / 2600 mAh alkaline battery (lifetime is approx.1 year) PC and use the included user-friendly ALink software. -
Page 4: Azor Kit Contents
It is usually installed in a hidden place. Warning: some GSM networks do not provide an exact time signal. In such a case Azor’s internal clock must be set manually from a PC via A-link. If the clock is not set, no time will be stated in the informative SMS. -
Page 5: Az-10D Rfid Tag Reader
(near the negative pole of the battery). If people smoke in the room during normal operation, you can program Azor to react only when set – see the Settings. In such a case disconnect the siren in the detector as well. Do not forget to ventilate the premises before setting the alarm. -
Page 6: Az-10P Motion Detector
This ensures that it does not transmit too frequently if there is frequent movement in the premises. Battery-low signalling When the detector batteries are low, Azor sends an informative message. Besides that, the detector LED flashes when movement is detected (outside test mode). AZ-10R remote control The remote control can be used for setting and unsetting. -
Page 7: Installation
SET on the AT-10D RFID tag reader and scanning the RFID tag. As a confirmation of successfull enrollment the registration code is displayed in the field. Note: Azor uses special security RFID tags. No other RFID tags can be enrolled to it. AZ-10M door-opening detector Besides detecting door and window opening, the detector can also report e.g. -
Page 8: Motion Detector Installation
AZOR-USB in the computer. Further connections will be significantly faster. If Azor is connected to an ARC, access to the setup page can be blocked. In such a case ask the ARC operators to help you change the settings. -
Page 9: Rfid Tag Reader Installation
If the GSM network provides an exact time function, the informative SMS comprises of time as well. Azor’s internal clock can also be set from a connected PC – see the Settings. Switching the GSM control unit on for the first time Find a concealed place near a socket. - Page 10 Press the GSM control unit button (E) and hold it for about 2 seconds (Azor will If you receive an alarm call, Azor does not call the other users. If no one receives the alarm light up). call, Azor tries to call all the users once more.
-
Page 11: Installation Of The Gsm Control Unit And Its Antenna
You can use the template at the rear of the manual to mark the spots where Setting Azor you want to fix Azor to the wall. The screws should protrude a bit so that the electronic box can be put on the screw heads and secured by moving it sideways. -
Page 12: Enrollment Of A Telephone
– including the number of the newly set telephone). Azor regularly checks its connection to the detectors and the RFID tag reader. If the connection is lost, a report is sent to the user (must be set) and information is also stored in the event memory. In such a ...