Henny Penny Wendy’s Evolution Elite EEG-253 Service Manual page 68

Using a 1" wrench, loosen the rear pump fitting.
3 3 ) )
Locate the appropriate conduit on right side of the unit and disconnect the
4 4 ) )
conduit from the fryer.
Using a 1/2 in. wrench, remove 4 bolts securing motor to motor bracket and pull
5 5 ) )
pump and motor assembly from fryer.
Using a 1/2 in. wrench, remove the 2 bolts securing pump to the motor and pull
6 6 ) )
the pump from the motor.
Install a new seal kit (part no. 17476) onto shaft of motor.
7 7 ) )
Align the shaft of motor with the rotor on the inside of the pump and push pump
8 8 ) )
onto shaft of motor.
Secure the pump onto the motor with the 2 bolts.
9 9 ) )
56